In Stock

The Weidmuller 1054460000 WQV 2.5/10 is a 10-pole cross-connector (jumper) for 2.5mm2 terminal blocks, grey colour. It links adjacent terminal bloc...

The ABB CP1-10G-10 (article 1SFA619100R1012) is a momentary flush pushbutton from ABB's compact range, featuring a green, non-illuminated actuator ...

The Legrand 601985 is a Plexo³ IP65 weatherproof distribution enclosure with 1 row and 18 DIN-rail modules. It is rated IP65 and designed for prote...

The Knipex 70 06 125 is a 125 mm diagonal cutter designed for electricians, mechatronics engineers, and electronics technicians. Its slim head prof...

The Knipex 95 05 10 SB is a 160 mm straight-blade electricians shear designed for cutting cables, trimming insulation, and general cutting tasks in...

The Knipex 12 64 180 is an automatic insulation stripper designed specifically for stripping PVC-insulated flat cables up to 12 mm wide. It self-ad...

Schneider Electric 13978 is a Mini Kaedra surface-mount weatherproof enclosure from the Mureva range, designed for modular devices on DIN rail with...

The Schneider Electric SDD111106 is a two-way switch from the Sedna Design & Elements range, finished in white, suitable for residential and li...

The Schneider Electric A9XPH212 is a horizontal comb busbar from the Acti 9 accessory range, designed for parallel connection of 1L+N (phase and ne...

The Schneider Electric Asfora EPH0600121 is a double 2-way switch in white, from the Asfora decorative wiring device range. It is supplied with a c...

The Schneider Electric XB4BS84441 is a red Ø40mm emergency stop push-button from the Harmony XB4 range, designed for 22mm panel mounting in industr...

The Schneider Electric 13443 is a mini surface-mounted enclosure for modular devices, part of the Mureva Enclosure range. Designed for 1 horizontal...

The Phoenix Contact UT 6-PE is a protective conductor terminal block that establishes a direct, low-resistance connection to ground potential via t...

The Phoenix Contact UT 2,5 BU is a feed-through terminal block rated at 1000 V nominal voltage and 24 A nominal current, accepting rigid and flexib...

The Knipex 26 16 200 is a 200 mm stork beak pliers (snipe nose side cutting pliers) designed for professional installation, feeding, and assembly w...

The Knipex 16 80 125 SB is a universal stripping tool designed to remove the outer sheath and strip the insulation of common round cables and damp-...

The Knipex 98 54 is a 190 mm cable knife designed for stripping and cutting cables and insulation in electrical installation work. The insulating m...

The Siemens 3RT2017-1BB42 is a SIRIUS series 3-pole contactor designed for reliable switching of AC motors and general loads in automation and cont...

The ABB SD204/50 (article 2CDD284101R0050) is a 4-pole switch disconnector rated at 50 A, designed to switch and isolate circuits in a single opera...

The ABB SD204/32 (article 2CDD284101R0032) is a 4-pole switch disconnector rated at 32 A, designed to safely isolate electrical circuits from the s...

The Hager ESC226 is a 25 A installation contactor with a 2NC (2 normally closed) contact configuration, designed for DIN rail mounting in residenti...

The Eaton M22-KC10 is a 1 NO contact element from the Moeller M22 series, with bottom base-fixing and screw terminal connection. Rated 6 A at 220-2...

The Eaton M22-LEDC230-G is a green LED element in the Moeller series M22 range, designed for base fixing installation in control panel operator sta...

The Schneider Electric A9N18367 is a 3-pole miniature circuit breaker (MCB) from the Acti 9 C120 range, providing overcurrent protection in AC and ...