In Stock

The WAGO 221-500 is a mounting carrier for the 221 Series, designed to hold 2-, 3-, and 5-conductor 221 Series Splicing Connectors (4 mm²) on a DIN...

The Eaton M22-D-B is a flat, momentary pushbutton from the RMQ-Titan M22 series with a blue, blank actuator and titanium bezel for Ø 22.5 mm panel ...

The Eaton M22-LEDC230-W is a white LED element from the Moeller series M22 range, designed for base-fixing panel-mounted status signalling. It acce...

The WAGO 2102-5207 is a 2-conductor ground terminal block in the TOPJOB® S 2102 Series, designed for protective earth connections on DIN-rail 35×15...

The WAGO 2102-5204 is a 2-conductor through terminal block from the TOPJOB® S 2102 Series, designed for fast, reliable wire connections in industri...

ABB PSR3-600-70 (article 1SFA896103R7000) is a compact softstarter for small three-phase motors, providing smooth acceleration and deceleration to ...

The Legrand 038216 is a CAB 3 cable marker showing the number "6" on a blue ring, sized for wire cross-sections 0.5 to 1.5 mm². It is supplied as a...

The Legrand 038213 is a CAB 3 cable marker showing the number "3" on a orange ring, sized for wire cross-sections 0.5 to 1.5 mm². It is supplied as...

The Weidmuller 2007190000 WS 12/5 is a 12x5mm white terminal marker for labelling DIN rail terminal blocks. Write-on or print-on for circuit identi...

The Schelinger GKL-AC-C16 is a residual current circuit breaker with overcurrent protection (RCBO) from the Schelinger GKL series. It is rated for ...

The Legrand 402032 is a residual current device, 2-pole, rated 25 A with 300 mA AC-type sensitivity for 230 V installations. It occupies 2 modules ...

The LC1D95BD is a 3-pole TeSys D series contactor from Schneider Electric, designed for motor switching and load control in industrial AC power cir...

The Giovenzana GM483 is a PQ04-format maintenance station combining a green LED status indicator, up and down control pushbuttons, and a protected ...

The Knipex 03 02 160 is a 160mm combination plier finished in black atramentized chrome vanadium steel, designed for gripping, holding, bending, an...

The Schneider Electric TM171EP14R is the Modicon M171 Performance Extension 14 I/O module, an additional I/O expansion unit for the Modicon M171/M1...

The Schneider Electric C10N3TM063 is a 3-pole moulded-case circuit breaker (MCCB) from the ComPacT NSX new generation range, model NSX100N, designe...

The WAGO 221-2401 is a 2-conductor inline splicing connector with levers from the 221 Series, designed to connect solid, stranded, and fine-strande...

The ABB OT63F3 (article 1SCA105332R1001) is a 3-pole, non-fusible switch-disconnector built for circuit isolation in panel and DIN-rail installatio...

The Schneider Electric WDE000510 is a 1-way wall switch from the Cedar Plus range, designed for surface-mount installation in residential and light...

The Schneider Electric A9F84240 is a 2-pole miniature circuit breaker (MCB) from the Acti 9 iC60H range, designed for overcurrent protection in res...

ABB PSE210-600-70-1 (article 1SFA897112R7001) is a softstarter for small to medium-sized three-phase motors, rated at 210 A with an operating volta...

ABB XT1N 160 TMD 160-1600 3p F F (article 1SDA067418R1) is a three-pole thermomagnetic circuit breaker from the TMAX XT1N series, built in a fixed-...

The Schneider Electric NSYCCOTHD is a ClimaSys CC double thermostat rated at 250V, designed to control both heating and ventilation functions withi...

The Legrand 402075 is a residual current device, 4-pole, rated 40 A with 30 mA A-type sensitivity for 400 V installations. It occupies 4 modules on...