In Stock

The ZB 6,LGS:FORTL.ZAHLEN 1-10 is a Phoenix Contact Zack marker strip for labeling modular terminal blocks and electronics modules with tall marker...

The Phoenix Contact D-STTB 2,5 (catalog number 3030459) is a gray end cover designed to terminate and protect DIN rail-mounted terminal block assem...

The ABB HKF1-11 (article 1SAM201901R1001) is an auxiliary contact module for front mounting on ABB manual motor starters. It provides one normally ...

The ABB MS116-2.5 (article 1SAM250000R1007) is a compact 45 mm wide manual motor starter with a current setting range of 1.6 A to 2.5 A. It lets op...

The ABB MS116-4.0 (article 1SAM250000R1008) is a compact 45 mm wide manual motor starter that switches motors on and off and guards them against sh...

The Phoenix Contact D-PT 10 is a gray end cover designed to close off and protect the ends of terminal block assemblies mounted on DIN rails. At ju...

The ATP-STTB 4 from Phoenix Contact is a partition plate designed to electrically isolate and separate adjacent terminal blocks within DIN rail ass...

Schneider Electric 13979 is a Mini Kaedra surface-mount weatherproof enclosure from the Mureva range with a 1 row x 12 module (18 mm) capacity, IP6...

The Schneider Electric A9S60120 is a 1-pole iSW switch-disconnector from the Acti 9 range, designed for the safe isolation of electrical circuits a...

The WAGO 243-808 is an 8-conductor MICRO PUSH WIRE splicing connector from the 243 Series, designed for low-voltage building installations in junct...

The Legrand 419229 is an RX³ miniature circuit breaker (MCB), 2-pole, rated 50 A on the C tripping curve, for 400 V installations. It has a short-c...

The Legrand 419169 is an RX³ miniature circuit breaker (MCB), 3-pole, rated 16 A on the B tripping curve, for 400 V installations. It has a short-c...

The Legrand 419133 is an RX³ miniature circuit breaker (MCB), 1-pole, rated 6 A on the B tripping curve, for 230 V installations. It has a short-ci...

The ABB 2513-94-507 (article 2CKA001725A1481) is a 3-gang cover frame in alpine white from the ABB Basic55 series. It provides a neat finished surr...

The Weidmuller WSI 6 is a WSI fuse terminal block, 6mm2, for standard fuse. Integrates fuse protection into the terminal rail. DIN rail mounting.Te...

The Schneider Electric WDE000523 is a Cedar Plus double socket outlet with side earthing, rated at 16 A / 250 V AC, designed for surface-mount inst...

The Phoenix Contact D-PTI/3B is an end cover that closes and protects the end of terminal block rows, providing a neat finish to DIN rail assemblie...

The WAGO 243-304 is a 4-conductor MICRO PUSH WIRE splicing connector from the 243 Series, designed for junction box use in low-voltage building ins...

The WAGO 222-413 is a 3-conductor splicing connector with levers from the 222 Series, designed for all conductor types - solid, stranded, and fine-...

The Eaton T0-3-8401/I1 is a 20 A reversing switch from the Moeller T0 series, designed for surface mounting with a maintained 1-0-2 switching actio...

The Phoenix Contact UT 35 is a feed-through terminal block rated at 1000 V nominal voltage and 125 A nominal current, with a 35 mm² nominal cross s...

The ABB F202 AC-40/0.03 (article 2CSF202001R1400) is a 2-pole residual current circuit breaker from the ABB F200 series, rated at 40 A with a 30 mA...

The A9TDF3616 is an arc fault detection RCBO (residual current breaker with overcurrent protection) from the Schneider Electric Acti9 range, model ...

The Schneider Electric EPH3300221 is an Asfora series TV-R coaxial outlet with IEC male connector, finished in White and supplied with a matching c...