WAGO 2202-1204 TOPJOB S Through Terminal Block 2.5mm² 24A Test Port

The WAGO 2202-1204 is a 2-conductor through terminal block from the TOPJOB S 2202 Series, rated for 2.5 mm² nominal cross-section and 24 A per IEC/EN 60947-7-1. Equipped with a built-in test port and push-button actuation, it is certified for Ex e II and Ex i hazardous-area applications under ATEX (PTB 18 ATEX 1005 U) and IECEx (PTB 18.0012U). Push-in CAGE CLAMP technology enables tool-free connection of solid and fine-stranded conductors without ferrule crimping.

Sold as a pack of 100 pieces.

Technical specifications:

• Catalog number: 2202-1204
• Manufacturer: WAGO
• Series: TOPJOB S, 2202 Series
• Type: 2-conductor through terminal block with push-button and test port
• Connection technology: Push-in CAGE CLAMP; actuation: push-button
• Nominal cross-section: 2.5 mm²; conductor range (solid and fine-stranded): 0.25 - 4 mm² / 22 - 12 AWG
• Strip length: 10 - 12 mm
• Rated voltage (IEC/EN 60947-7-1): 800 V; rated current: 24 A
• Rated voltage (UL 1059 / CSA 22.2 No. 158): 600 V; rated current: 20 A
• Rated voltage Ex e II (ATEX/IECEx): 550 V; rated current Ex e II: 22 A
• Dimensions (W × H × D): 5.2 × 48.5 × 39.5 mm
• Mounting: DIN-35 rail (35 × 15 mm and 35 × 7.5 mm)
• Marking: Center and side
• Color: Blue housing, orange actuator
• Insulation material: Polyamide (PA66); flammability class: UL94 V0
• Weight: 5.3 g
• Continuous operating temperature: -60 - +105 °C
• Clamping units: 2; jumper slots: 2; wiring direction: front-entry
• Standards: IEC/EN 60947-7-1, UL 1059, CSA 22.2 No. 158, DIN EN 50155
• Certifications: ATEX PTB 18 ATEX 1005 U, IECEx PTB 18.0012U

Features and benefits:

• Push-in CAGE CLAMP accepts solid and fine-stranded conductors directly without tools or ferrule crimping preparation.
• Integrated test port allows in-service circuit testing under live conditions without disconnecting conductors.
• Dual-certified under ATEX and IECEx for both Ex e II (increased safety) and Ex i (intrinsic safety) hazardous zones.
• Tested per DIN EN 50155 and DIN EN 61373 for railway rolling stock vibration and shock requirements, Category 1, Class A/B.

Applications:

• Through-wiring in industrial control panels and switchgear enclosures.
• Ex e II and Ex i certified installations in hazardous-area environments.
• Modern building installation wiring requiring maintenance-free push-in terminal connections.
• Railway rolling stock electrical systems subject to DIN EN 50155 compliance requirements.

Also known as: WAGO 2202-1204, WAGO TOPJOB S push-button through terminal block 2.5mm².