Products

The Hager MC332A is a Hager miniature circuit breaker, 3P, 32 A, C curve, 6kA. For final circuit protection. Mounts on 35mm DIN rail.Technical spe...

The Hager MC340A is a Hager miniature circuit breaker, 3P, 40 A, C curve, 6kA. For final circuit protection. Mounts on 35mm DIN rail.Technical spe...

The Hager MC350A is a Hager miniature circuit breaker, 3P, 50 A, C curve, 6kA. For final circuit protection. Mounts on 35mm DIN rail.Technical spe...

The Hager MC363A is a Hager miniature circuit breaker, 3P, 63 A, C curve, 6kA. For final circuit protection. Mounts on 35mm DIN rail.Technical spe...

The Hager MCN116E is a single-pole miniature circuit breaker rated 16 A with a type C tripping characteristic and 6 kA breaking capacity to IEC 608...

The Hager P012 is a set of universal cover strips for 12-module distribution boards, used to cover unused DIN rail module positions and blanking pl...

The Hager SBN125 is a 1-pole load break switch (disconnector) rated at 25 A and 230 V AC, designed for DIN rail installation in electrical distribu...

The Hager SBN140 is a 1-pole load break switch rated at 40 A and 230 V AC, designed for DIN rail installation in modular electrical distribution sy...

The Hager SBN316 is a 3-pole load break switch rated at 16 A and 400 V AC for DIN rail installation in modular distribution systems. It provides si...

The Hager SBN325 is a 3-pole load break switch (Ausschalter) rated at 25 A and 400 V AC, designed for DIN rail mounting in distribution boards and ...

The Hager SBN332 is a Hager SBN modular load break switch, 3P, 32 A. For manual isolation and switching of circuits in distribution boards. Mounts ...

The Hager SBN340 is a 3-pole load break switch (disconnector) rated at 40 A, designed for safe isolation of three-phase AC circuits in DIN rail-mou...

The Hager SBN363 is a 3-pole load break switch (disconnector) rated at 63 A, designed for safe isolation of electrical circuits on 400 V AC systems...

The Hager SBN380 is a 3-pole load break switch (disconnector) rated at 80 A and 400 V AC, intended for DIN rail installation in electrical distribu...

The Hager SBN390 is a 3-pole 100 A load break switch (disconnector) for DIN rail mounting, rated at 400 V AC. It provides circuit isolation and loa...

The Hager SBN399 is a Hager SBN modular load break switch, 3P, 125 A. For manual isolation and switching of circuits in distribution boards. Mounts...

The Hager SF463 is a 4-pole 63A changeover switch with I-0-II switching positions (source 1 - off - source 2), rated at 230/400V. Used for manual c...

The Hager SFT125 is a 1-pole 25A modular changeover switch with top common point for DIN rail mounting. It provides I-0-II manual changeover betwee...

The Hager SFT140 is a 1-pole modular changeover switch with a top common point and three switching positions (I-0-II), designed for controlled swit...

The Hager SFT240 is a 2-pole modular changeover switch with a top common point and three switching positions (I-0-II), designed for controlled swit...

The Hager SFT440 is a 4-pole 40A modular changeover switch with centre-off position for DIN rail mounting. It simultaneously switches three-phase p...

The Hager SVN129 is a DIN rail LED signal module with three indicators - red, green and orange - operating from 230 V AC. It is one module wide and...

The Hager SVN311 is a modular impulse (momentary) pushbutton with one normally open contact, rated 16 A at 230 V. It takes one module on a DIN rail...

The Hager SVN413 is a modular latching pushbutton with one normally open contact and a green indicator light, rated 16 A at 230 V AC. It takes one ...