All Products

The WAGO 2009-310 is a dual-blade operating tool designed for use with TOPJOB®S installation terminal blocks. It carries two blade profiles - 3.5 x...

The WAGO 282-868 is a 3-conductor ground terminal block from the 282 Series, rated per IEC/EN 60947-7-2, designed to terminate protective earth con...

The WAGO 281-402 is an insulated jumper for rail-mounted terminal blocks, used to common positions 1 and 2 across adjacent 281 series terminals. It...

The WAGO 281-322 is a separator plate for the 281 Series rail mounted terminal blocks, 2 mm thick and oversized, supplied in orange. Dimensioned at...

The WAGO 281-302 is an end and intermediate plate, 3 mm thick, for the 281 Series rail-mounted terminal block system. Molded in orange polyamide (P...

The WAGO 281-101 is a 2-conductor through terminal block from the 281 Series, designed for simple and secure electrical connections in industrial a...

The WAGO 249-119 is a gray group marker carrier designed for use as an additional group marker carrier or continuous marking strip carrier on termi...

The WAGO 2102-5207 is a 2-conductor ground terminal block in the TOPJOB® S 2102 Series, designed for protective earth connections on DIN-rail 35×15...

The WAGO 2102-5204 is a 2-conductor through terminal block from the TOPJOB® S 2102 Series, designed for fast, reliable wire connections in industri...

The WAGO 2009-305 is a busbar carrier with end stop function and detachable separator plate, designed for mounting on DIN 35 rail. At 7.5 mm wide, ...

The WAGO 2004-1201 is a 2-conductor through terminal block from the TOPJOB S series, rated 800 V and 32 A per IEC/EN 60947-7-1. It uses Push-in CAG...

The WAGO 2002-404 is a 4-way insulated push-in type jumper bar from the TOPJOB S series, used to common adjacent rail-mount terminal blocks in a si...

The WAGO 2002-403 is a 3-way insulated push-in type jumper bar in the TOPJOB S family, rated at 800 V (III/3) and 25 A. It commons adjacent rail-mo...

The WAGO 2002-3201 is a triple-deck through terminal block from the TOPJOB S 2002 Series, providing three independent L/L/L potentials in a single ...

The WAGO 2002-1207 is a 2-conductor ground terminal block from the TOPJOB® S 2002 Series, designed for DIN-35 rail mounting with a nominal cross-se...

The WAGO 2000-1201 is a 2-conductor through terminal block from the TOPJOB S 2000 Series, using Push-in CAGE CLAMP technology for tool-free inserti...

The WAGO 221-942/000-006 is a 2-way insulated jumper for the 221 Series splicing connectors, designed to extend N and PE (ground) distribution betw...

The WAGO 221-942 is a 2-way insulated jumper for conductor entry in the 221 Series splicing connector family. It plugs into open clamping units wit...

The WAGO 221-941/000-006 is a 2-way insulated blue jumper for conductor entry, used with WAGO 221 Series splicing connectors. It bridges positions ...

The WAGO 210-133 is a tin-plated copper busbar, 1000 mm long with a 10 mm x 3 mm cross-section, rated for 140 A continuous current. Color-coded whi...

The Telemecanique XS118B3PAM12 is an XS1 series inductive proximity sensor with M18 brass body, 50mm length, and 8mm sensing distance. It detects f...

The Telemecanique XS112B3PAM12 is an XS1 series inductive proximity sensor with M12 brass body, 50mm length, and 4mm sensing distance. It detects f...

The Telemecanique XMPC06C2941S701 is an electromechanical pressure switch (pressure sensor) for hydraulic and pneumatic system control. It provides...

The Telemecanique XCMD2102L1 is a miniature fixed-body limit switch from the XC Standard range, used for precise position detection in industrial m...