All Products

The Schneider Electric LXD1F7 is a replacement contactor coil from the TeSys D range (LXD1 series), rated at 110 V AC 50/60 Hz. It is designed as a...

The Schneider Electric LXD1B7 is a TeSys D series replacement contactor coil (LXD1 range) rated at 24 V AC 50/60 Hz, designed for use with LC1D09–D...

The Schneider Electric LC1DT80AP7 is a 4-pole TeSys D contactor for AC-1 (non-inductive and mildly inductive) load switching in industrial power ci...

The Schneider Electric LC1D188P7 is a 4-pole contactor from the TeSys D range, designed for switching resistive and slightly inductive loads under ...

The Schneider Electric LC1D12E7 is a 3-pole TeSys D contactor from the LC1D model range, designed for switching three-phase AC motor loads and indu...

The Schneider Electric LC1D128E7 is a TeSys D series 4-pole contactor for AC-1 applications such as resistive heating banks and distribution switch...

The Schneider Electric LADN02 is a front-mounting auxiliary contact block from the TeSys Deca range, fitted with 2 normally closed (NC) instantaneo...

The Schneider Electric CA2KN22P7 is a TeSys K auxiliary contactor with a 2 NO + 2 NC contact arrangement and a 230 V AC coil, designed for use in c...

The Schneider Electric LC2K0910B7 is a TeSys K series reversing contactor for controlling three-phase induction motors in forward and reverse rotat...

The Schneider Electric LC1K0610B7 is a 3-pole TeSys K series contactor for AC motor control and general switching applications, rated 6 A at AC-3 d...

The Schneider Electric A9C20132 is an Acti 9 iCT contactor for switching and control applications in residential and commercial distribution boards...

The WAGO 750-600 is an end module for WAGO 750 Series fieldbus node assemblies. After the buscoupler and I/O modules are assembled, the end module ...

The WAGO 2204-1307 is a 3-conductor ground terminal block from the 2204 Series, using Push-in CAGE CLAMP® technology with push-button actuation. It...

The WAGO 2010-1207 is a 2-conductor ground terminal block from the 2010 Series, designed for DIN-rail installation and suitable for Ex e II applica...

The WAGO 2003-7646 is a three-level, three-potential multilevel installation terminal block from the 2003 Series, designed for N/L/PE connections i...

The WAGO 2002-433 is an insulated, light grey jumper for TOPJOB S terminal blocks, bridging positions 1 to 3. It carries IEC/EN ratings of 800 V an...

The WAGO 2002-423 is an insulated, light grey continuous jumper bridging positions 1 to 3, designed for commoning adjacent terminal blocks. It enab...

The Weidmüller KLBUE 3-8 SC (order no. 1692261001) is a steel clamping yoke for shield connection, designed to provide flexible and self-adjusting ...

The Weidmüller KLBUE 3-8 (Order No. 1600480000) is a steel clamping yoke for shield connection, snap-mounted onto a busbar to provide flexible, sel...

The Weidmüller DEK 5 FWZ 51-60 is a Dekafix terminal marker designed for use with conductor and plug-in connectors as well as electronic sub-assemb...

The Weidmüller DEK 6 FWZ 51-60 (order no. 0518960051) is a Dekafix terminal marker measuring 5 mm × 6 mm, supplied as a card of 500 white markers p...

The Weidmüller DEK 6 FWZ 41-50 is a Dekafix terminal marker for use on conductor and plug-in connectors and electronic sub-assemblies. Pre-printed ...

The Weidmüller DEK 6 FWZ 31-40 is a Dekafix terminal marker supplied in strips for single-step installation on conductor connectors, plug-in connec...

The Weidmüller DEK 6 FWZ 21-30 is a Dekafix terminal marker pre-printed with numbers 21–30, designed for use with all Weidmüller cable connectors a...