MTN4366-0130 USB charger insert type 1x USB C with Power delivery technology and 65W charging perfomance

Schneider Electric Merten insert M USB charger MTN4366-0130 is a device with fixing frame and claws with 1 USB C output, allowing charging for mobile/tablet and notebook and notebook devices. The input voltage of this device is 240V. The power consumption is below 0,1W and the nominal output power of this USB charger is 65W with PD technology. The output Voltage and related current will be automatically adapted by PD protocol by 5V 3A 15W / 9V 3A 27W / 12V 3A 36W /15V 3A 45W / 20V 3.25A 65W for USB C. In addition, the rated operationalVoltage of this device is between 100 Volt and 240 Volt. The outputVoltage of this device is 5 Volt. The protection type of this USB charger is electronic overload and temperature protection, improving safety level. Its fixing mode is by screws. Its mounting box can be recessed into the surface with flush type. It is 51 mm in width, 40.7 mm in height, 30 mm in depth, with an embedding depth of 30.8 mm. This USB charger is very robust, with 30000 hours of service life. Besides, it reaches IK04 protection level, protecting against 0.5 joules of impact. This USB charger reaches IP20 against solid objects and liquids. What's more, it's directives are 2002/95/EC - Ro. HS directive, 2002/96/EC - WEEE directive, 2004/108/EC - electromagnetic compatibility, 2006/95/EC - low voltage directive. Also, being environment-friendly, this device reached Regulation (EC) No 1907/2006. The USB charger is made of PC (polycarbonate) GF10 FR, making it as resistant as possible. It obtained EAC certificate as well. What's more, it well satisfied the standards of EN 60950-1, EN 62684, ETSI EN 301 489-4. System M range is based on 4 different surfaces and materials. With 9 different design variations and over 280 functions, the system can meet any customer demand.