Schneider Electric

This Schneider Electric SpaceLogic KNX Fan Coil 0-10 V Controller is an actuator operating by KNX bus type. The IP rating of this device is IP20. T...

For actuation of electrothermal valve drives for heating or cooling ceilings The valve drive controller has 6 electronic outputs Up to 4 valve driv...

The heating actuator has 6 thermoelectric valve drives for heating or cooling. Up to 4 valve drives can be connected to each output. The outputs ar...

The SpaceLogic KNX DALI Gateway Pro controls electronic ballasts with DALI interface via the KNX installation bus The gateway is DALI 2.0 multi-mas...

The KNX DALI Gateway connects the KNX bus to 2 DALI outputs The gateway is a category I DALI control device with an integrated DALI power supply f...

The KNX DALI Gateway connects the KNX bus to 1 DALI output The gateway is a category I DALI control device with an integrated DALI power supply for...

SpaceLogic KNX Universal Dimming Master. Dimming actuator with 2 channels for switching and dimming dimmable LED lamps, incan -descent lamps, HV ha...

Universal dimming actuator has 4 channel 250W/VA with manual override. It has automatic load detection and Different phases can be connected. the a...

Universal dimming actuator has 2 channel 300W/VA with manual override. It has automatic load detection and Different phases can be connected. the a...

Push-button interface, 4-gang plus. Generates an internal signal voltage for connecting 4 conventional push-buttons or floating contacts, and for c...

Push-button interface, 2-gang plus. Generates an internal signal voltage for connecting 2 conventional push-buttons or floating contacts, and for c...

SpaceLogic KNX Switch/Blind Master. For independent control of up to 4 blind/roller shutter drives or for switching up to 8 loads via make contacts...

KNX Switch Actuator Basic REG-K/2x/16 A with manual mode For independent switching of 2 loads via make contacts. All switch outputs can be operated...

Lead gel battery. Lead gel battery for connecting to the emergency power supply REG. Nominal voltage: DC 12 V. Capacity: 18 Ah.

Lead gel battery, 7.2 Ah. Lead gel battery to connect to the emergency input of the power supply 320 REG-K with battery connection. Nominal voltage...

KNX brightness and temperature sensor. The sensor records brightness and temperature and transmits these values to the bus. It has a temperature se...

Weather combi-sensor DCF-77. The weather combi-sensor includes a wind sensor, precipitation sensor, twilight sensor and three brightness sensors (E...

Temperature sensor. The temperature is measured with the temperature sensor and converted into an analogue output signal of 0-10 V. For external in...