Produkte

Universal dimming actuator has 1 channel 500W/VA with manual override. It has automatic load detection. the actuator can be installed for Installat...

KNX roller shutter actuator REG-K/4x/10 with manual mode. For independent control of 4 roller shutter drives. The function of the roller shutter ch...

KNX blind actuator REG-K/2x/10 with manual mode. For independent control of 2 blind/roller shutter drives. The function of the blind channels is fr...

KNX blind actuator REG-K/4x/10 with manual mode. For independent control of 4 blind/roller shutter drives. The function of the blind channels is fr...

KNX blind actuator REG-K/8x/10 with manual mode. For independent control of 8 blind/roller shutter drives. The function of the blind channels is fr...

For independent control of up to 8 blind/roller shutter drives or for switching up to 16 loads via make contacts. The function of the blind or swit...

For independent control of up to 12 blind/roller shutter drives or for switching up to 24 loads via make contacts. The function of the blind or swi...

This device from the Spacelogic KNX range is a DIN Rail Coupler used for logic connection and electrical isolation of lines and areas. The device s...

This device from the Spacelogic KNX range is an IP Router DIN Rail. The Spacelogic KNX IP Router allows the forwarding of telegrams between differe...

The KNX InSideControl IP gateway connects the KNX installation with the IP network (LAN). In combination with the applications /InSideControl App/H...

U.motion KNX Server. The U.motion KNX Server visualises, manages and controls KNX building functions across platforms. For example: Building monito...

U.motion KNX Server Plus. The U.motion KNX Server Plus visualises, manages and controls KNX building functions across platforms. LEDs whichFor exam...

Spacelogic KNX USB Interface DIN Rail. For connecting a programming or diagnostics device with a USB 2.0 interface to the KNX. The USB connector (T...

This device from the Spacelogic KNX range is an IP Interface DIN Rail. The Spacelogic KNX IP Interface is an interface between IP and KNX. You can ...

The KNX Metering Gateway is a gateway between a Modbus installation and the KNX bus. The device transmits measured power and consumption values fro...

SpaceLogic KNX Power Supply 1280 mA The SpaceLogic KNX power supply generates the bus voltage for the KNX line The power supply has two outputs – o...

SpaceLogic KNX Power Supply 640 mA. The SpaceLogic KNX power supply generates the bus voltage for the KNX line. The power supply has two outputs – ...

SpaceLogic KNX Power Supply 320 mA. The SpaceLogic KNX power supply generates the bus voltage for the KNX line. The power supply has two outputs – ...

Device for measuring and monitoring energy consumption at up to three channels. Different phases can be connected to the channels. The data is tran...

KNX Year Time Switch REG-K/8/800. 8-channel KNX time switch with year and astro program. Time switch with connection option for DCF and GPS antenna...

DCF77 Antenna V2. Antenna for receiving the time by radio signal. Connect the antenna to the year time switch. To get the best reception, the anten...