WAGO Terminal Blocks & Connectors | Fast & Reliable Wiring

The WAGO 2016-1301 is a 3-conductor through terminal block in the TOPJOB S 2016 Series, rated 76 A at 800 V AC per IEC/EN 60947-7-1 and certified E...

The WAGO 2002-402/000-005 is a 2-way insulated push-in type jumper bar for the 2002 Series rail-mount terminal blocks, used to common adjacent term...

The WAGO 243-808 is an 8-conductor MICRO PUSH WIRE splicing connector from the 243 Series, designed for low-voltage building installations in junct...

The WAGO 243-113 is a mounting carrier from the 243 Series, designed to hold up to 6 MICRO PUSH WIRE connectors for organized wiring in distributio...

The WAGO 2002-1201 is a 2-conductor through terminal block from the TOPJOB S 2002 Series, designed for through-wiring in industrial and building in...

The WAGO 243-304 is a 4-conductor MICRO PUSH WIRE splicing connector from the 243 Series, designed for junction box use in low-voltage building ins...

The WAGO 773-173 is a 3-conductor PUSH WIRE splicing connector from the 773 Series, designed for safe, quick, and easy installation in junction box...

The WAGO 222-412 is a 2-conductor splicing connector with levers from the 222 Series, designed to connect all conductor types with a maximum cross-...

The WAGO 207-4301 is a branch junction box for multicore cables, designed for use with 221 Series connectors up to 4 mm² and capable of connecting ...

The WAGO 224-101 is a 1-pole lighting connector from the 224 Series (PUSH WIRE®), designed for quick and reliable termination between fixed install...

The WAGO 2202-1207 is a 2-conductor ground terminal block from the TOPJOB S 2202 Series, designed to connect electrical conductors directly to a DI...

The WAGO 2587-2147 is a 1-phase, DIN-35 rail-mounted switched-mode power supply that converts 100–240 VAC mains to a regulated 24 VDC SELV output a...

The WAGO 206-1250 is a manual crimping tool for applying insulated and uninsulated ferrules to conductors with a cross-section of 35 mm² or 50 mm²....

The WAGO 210-721 is a metal operating tool with a partially insulated shaft and a 5.5 x 0.8 mm blade, suited for front-entry terminal blocks. Blade...

The WAGO 2002-433 is an insulated, light grey jumper for TOPJOB S terminal blocks, bridging positions 1 to 3. It carries IEC/EN ratings of 800 V an...

The WAGO 2002-423 is an insulated, light grey continuous jumper bridging positions 1 to 3, designed for commoning adjacent terminal blocks. It enab...

The WAGO 221-2401 is a 2-conductor inline splicing connector with levers from the 221 Series, designed to connect solid, stranded, and fine-strande...

The WAGO 788-512 is a relay module for DIN-35 rail mounting that accepts a 24 VAC nominal input voltage and switches two changeover contacts at up ...

The WAGO 2004-1201 is a 2-conductor through terminal block from the TOPJOB S series, rated 800 V and 32 A per IEC/EN 60947-7-1. It uses Push-in CAG...

The WAGO 2002-3201 is a triple-deck through terminal block from the TOPJOB S 2002 Series, providing three independent L/L/L potentials in a single ...

The WAGO 2002-1207 is a 2-conductor ground terminal block from the TOPJOB® S 2002 Series, designed for DIN-35 rail mounting with a nominal cross-se...

The WAGO 2000-1201 is a 2-conductor through terminal block from the TOPJOB S 2000 Series, using Push-in CAGE CLAMP technology for tool-free inserti...

The WAGO 2203-7646 is a multilevel installation terminal block from the 2203 Series, combining neutral, live, and protective earth connections in o...

The WAGO 2002-406 is a 6-way insulated push-in type jumper bar from the TOPJOB S product group, designed to common multiple terminal positions acro...