WAGO Terminal Blocks & Connectors | Fast & Reliable Wiring

The WAGO 788-512 is a relay module for DIN-35 rail mounting that accepts a 24 VAC nominal input voltage and switches two changeover contacts at up ...

The WAGO 282-868 is a 3-conductor ground terminal block from the 282 Series, rated per IEC/EN 60947-7-2, designed to terminate protective earth con...

The WAGO 281-402 is an insulated jumper for rail-mounted terminal blocks, used to common positions 1 and 2 across adjacent 281 series terminals. It...

The WAGO 281-322 is a separator plate for the 281 Series rail mounted terminal blocks, 2 mm thick and oversized, supplied in orange. Dimensioned at...

The WAGO 281-302 is an end and intermediate plate, 3 mm thick, for the 281 Series rail-mounted terminal block system. Molded in orange polyamide (P...

The WAGO 281-101 is a 2-conductor through terminal block from the 281 Series, designed for simple and secure electrical connections in industrial a...

The WAGO 249-119 is a gray group marker carrier designed for use as an additional group marker carrier or continuous marking strip carrier on termi...

The WAGO 2102-5207 is a 2-conductor ground terminal block in the TOPJOB® S 2102 Series, designed for protective earth connections on DIN-rail 35×15...

The WAGO 2102-5204 is a 2-conductor through terminal block from the TOPJOB® S 2102 Series, designed for fast, reliable wire connections in industri...

The WAGO 2004-1201 is a 2-conductor through terminal block from the TOPJOB S series, rated 800 V and 32 A per IEC/EN 60947-7-1. It uses Push-in CAG...

The WAGO 2002-3201 is a triple-deck through terminal block from the TOPJOB S 2002 Series, providing three independent L/L/L potentials in a single ...

The WAGO 2000-1201 is a 2-conductor through terminal block from the TOPJOB S 2000 Series, using Push-in CAGE CLAMP technology for tool-free inserti...

The WAGO 221-942/000-006 is a 2-way insulated jumper for the 221 Series splicing connectors, designed to extend N and PE (ground) distribution betw...

The WAGO 221-942 is a 2-way insulated jumper for conductor entry in the 221 Series splicing connector family. It plugs into open clamping units wit...

The WAGO 221-941/000-006 is a 2-way insulated blue jumper for conductor entry, used with WAGO 221 Series splicing connectors. It bridges positions ...

The WAGO 249-117 is a screwless end stop, 10 mm wide, designed to secure rail-mount terminal blocks against movement on DIN-35 rails per DIN EN 607...

The WAGO 2003-7645 is a three-level multilevel installation terminal block from the 2003 Series (TOPJOB S), designed for L/L/PE potential distribut...

The WAGO 782-317 is an end and intermediate plate for TOP JOB Installation Terminal Blocks (Product Group 17). Measuring 1.5 mm wide, it fits betwe...

The WAGO 2002-400 is an insulated 2-way continuous jumper from the TOPJOB S series, designed to readily connect an endless number of adjacent termi...

The WAGO 782-604 is a 2-conductor through terminal block from the 782 Series, rated 1000 V and 41 A per IEC/EN 60947-7-1, and suitable for Ex i (in...

The WAGO 782-607 is a 2-conductor ground terminal block from the 782 Series, designed for protective earth connections on DIN-35 rail (35 × 15 mm a...

The WAGO 221-2421 is a 221 Series inline splicing connector with levers, designed for connecting solid, stranded, and fine-stranded copper conducto...

The WAGO 207-1372 is a Size 1 inline gelbox from the 207 Series, designed to house WAGO 221 Series splicing connectors up to 4 mm² and deliver IPX8...

The WAGO 207-1373 is a Size 2 Gelbox for inline cable connections, designed for use with 221 Series max. 4 mm² splicing connectors (sold without sp...