Schneider Electric

Rain sensor. The rain sensor is used to record and evaluate precipitation and is intended for external mounting. A sensor evaluates the conductivit...

Twilight sensor. The twilight sensor is required to record and evaluate brightness. Brightness is recorded via a photoelectric diode and electronic...

The brightness sensor is required for recording and evaluating brightness. Brightness is recorded via a photoelectric diode and electronically conv...

Wind sensor with 0-10 V interface and heating. The wind sensor evaluates the wind speed and converts it into an analogue 0-10 V output voltage. The...

Wind sensor with 0-10 V interface. The wind sensor evaluates the wind speed and converts it into an analogue 0-10 V output voltage. For external in...

Power supply REG, AC 24 V/1 A. Power supply for 24 V binary inputs, weather station REG-K/4-gang, rain sensor. For the wind sensor with 0 - 10 V in...

DCF77 Antenna V2. Antenna for receiving the time by radio signal. Connect the antenna to the year time switch. To get the best reception, the anten...

KNX Year Time Switch REG-K/8/800. 8-channel KNX time switch with year and astro program. Time switch with connection option for DCF and GPS antenna...

Device for measuring and monitoring energy consumption at up to three channels. Different phases can be connected to the channels. The data is tran...

SpaceLogic KNX Power Supply 320 mA. The SpaceLogic KNX power supply generates the bus voltage for the KNX line. The power supply has two outputs – ...

SpaceLogic KNX Power Supply 640 mA. The SpaceLogic KNX power supply generates the bus voltage for the KNX line. The power supply has two outputs – ...

SpaceLogic KNX Power Supply 1280 mA The SpaceLogic KNX power supply generates the bus voltage for the KNX line The power supply has two outputs – o...

The KNX Metering Gateway is a gateway between a Modbus installation and the KNX bus. The device transmits measured power and consumption values fro...

This device from the Spacelogic KNX range is an IP Interface DIN Rail. The Spacelogic KNX IP Interface is an interface between IP and KNX. You can ...

Spacelogic KNX USB Interface DIN Rail. For connecting a programming or diagnostics device with a USB 2.0 interface to the KNX. The USB connector (T...

U.motion KNX Server Plus. The U.motion KNX Server Plus visualises, manages and controls KNX building functions across platforms. LEDs whichFor exam...

U.motion KNX Server. The U.motion KNX Server visualises, manages and controls KNX building functions across platforms. For example: Building monito...

The KNX InSideControl IP gateway connects the KNX installation with the IP network (LAN). In combination with the applications /InSideControl App/H...

This device from the Spacelogic KNX range is an IP Router DIN Rail. The Spacelogic KNX IP Router allows the forwarding of telegrams between differe...

This device from the Spacelogic KNX range is a DIN Rail Coupler used for logic connection and electrical isolation of lines and areas. The device s...

For independent control of up to 12 blind/roller shutter drives or for switching up to 24 loads via make contacts. The function of the blind or swi...

For independent control of up to 8 blind/roller shutter drives or for switching up to 16 loads via make contacts. The function of the blind or swit...