Power and Connectors

The Weidmuller WSI 6 is a WSI fuse terminal block, 6mm2, for standard fuse. Integrates fuse protection into the terminal rail. DIN rail mounting.Te...

The Phoenix Contact FBS 3-5 is a 3-position plug-in bridge for use in the CLIPLINE complete modular terminal block system, enabling multiple termin...

The Phoenix Contact PT 4-PE is a protective conductor terminal block providing a low-resistance connection to ground potential via direct DIN rail ...

The WAGO 2006-1201 is a 2-conductor through terminal block from the TOPJOB S 2006 Series, designed to connect electrical conductors quickly and saf...

The Phoenix Contact SK 8 is a shield connection clamp for terminating cable shields on neutral busbars, achieving a contact resistance below 1 mΩ. ...

The Phoenix Contact AB/SS-M is a support bracket designed to secure 3 x 10 mm busbars in panel assemblies, providing direct contact to the mounting...

The Phoenix Contact KLM 3 (catalog number 0811969) is a terminal strip marker carrier with infinitely adjustable labeling area height, engineered s...

The WAGO 2003-7642 is a 3-level installation terminal block from the TOPJOB S 2003 Series, designed for L/L potential connections. Using Push-in CA...

The Phoenix Contact PT 16 N is a feed-through terminal block from the PT product family, rated at 1000 V nominal voltage and 76 A nominal current f...

The Phoenix Contact ATP-ST 6 is a partition plate designed to provide physical separation and electrical isolation between adjacent terminal blocks...

The Phoenix Contact UT 35 is a feed-through terminal block rated at 1000 V nominal voltage and 125 A nominal current, with a 35 mm² nominal cross s...

The FBS 2-5 is a 2-position plug-in bridge from Phoenix Contact, designed to electrically connect adjacent terminal blocks in the CLIPLINE complete...

The Phoenix Contact PTFIX 6/6X2,5-NS35 BK is a black DIN rail distribution block that integrates a 6 mm² line contact supply input with six 2.5 mm²...

The WAGO 2002-1401 is a 4-conductor through terminal block in the TOPJOB S 2002 Series, rated 800 V / 24 A per IEC/EN 60947-7-1 and approved for Ex...

The WAGO 210-719 is a metal operating tool with a 2.5 x 0.4 mm blade and a partially insulated shaft, intended for actuating CAGE CLAMP® terminal b...

The Legrand 004832 is an IP2X-rated earth terminal block designed for protective earth connections in electrical installations. Identified by its g...

The Phoenix Contact E/NS 35 N is a gray polyamide end bracket designed to secure and terminate terminal block assemblies on NS 35/7.5 and NS 35/15 ...

The WAGO 793-5472 is a pre-printed WMB marker card supplied ready-marked with the standard electrical distribution symbols L1, L2, L3, N, and PE in...

The Phoenix Contact D-PTIO 1,5/S/3 is a gray PA end cover that closes the open terminal side of compatible terminal block assemblies. Measuring 2.2...

The Phoenix Contact PT 6-PE is a protective conductor terminal block for grounding and earthing connections on NS 35/7.5 and NS 35/15 DIN rails. It...

The Phoenix Contact UCT-TM 6 is an unmarked terminal block marker sheet from the UniCard labeling range, designed for Phoenix Contact terminals wit...

The Circutor CLZ-FP-44/25-HD (code R2H54L) is a three-phase tubular power capacitor from the Heavy Duty (HD) range, rated at 20 kvar at 400 V and 2...

The Phoenix Contact PT 1,5/S-PE/L/N is a 3-row multi-level ground terminal block providing combined PE, L, and N connections in one 3.5 mm wide uni...

The Weidmuller WDU 10 is a WDU feed-through terminal block, 10mm2, 1000V, 57A, Blue. For general conductor feed-through in control panels. DIN rail...