Power and Connectors

The Phoenix Contact SK 5 is a shield connection clamp designed to ground cable shields directly onto neutral busbars with a contact resistance of l...

The Weidmuller 0523060011 is a marker / label for industrial wiring. DEK 5 FWZ 11-20 Dekafix, Terminal Marker, 5x5mm, White - set of 50.Technical s...

The Phoenix Contact URTK/S-BEN 10 is a test disconnect terminal block rated at 500 V / 57 A nominal, designed for current transformer secondary cir...

The UCT-WMCO 6,8 (23X8) is a clip-on conductor marker from Phoenix Contact for subsequent labeling of cables with an external diameter of 6.1 mm to...

The Weidmuller 1609920000 is a marker / label for industrial wiring. WS 12/6.5 MC NE WS Terminal Marker, 12x6.5mm, White - set of 45.Technical spec...

The Phoenix Contact UKK 3 is a double-level terminal block that routes two independent circuits within a compact 5.2 mm wide body. Rated at 500 V a...

The Weidmuller 1640740000 is a marker / label for industrial wiring. WS 8/5 MC NE WS Terminal Marker 8x5mm, White - set of 72.Technical specificati...

The Phoenix Contact EB 4- 8 is a 4-position insertion bridge designed to electrically interconnect adjacent screw-mounted terminal blocks at an 8 m...

The WAGO 2004-407 is a 7-way insulated push-in type jumper bar from the TOPJOB S series (Product Group 22), designed to common up to seven adjacent...

The Circutor CLZ-FPT-44/2.5-HD (code R2H542) is a three-phase dry-type tubular power capacitor from Circutor's Heavy Duty CLZ-HD range, rated at 2 ...

The Phoenix Contact US-WMTB (44X15) is a white (RAL 9010) PVC cable marker card for identifying cables with an external diameter greater than 13 mm...

The Circutor CLZ-FPT-44/6.25-HD (code R2H547) is a three-phase tubular power capacitor from the Heavy Duty range, rated at 6.25 kvar at 440 V and 5...

The WAGO 282-868 is a 3-conductor ground terminal block from the 282 Series, rated per IEC/EN 60947-7-2, designed to terminate protective earth con...

The Weidmuller 1988160000 is a terminal block for industrial wiring. AAP11 1.5 LI RD Modular Distribution Terminals, PUSH IN, 1.5mm² 500V 17.5A, Da...

The Phoenix Contact FBS 4-8 is a 4-position plug-in bridge designed for use in the CLIPLINE complete terminal block system. With an 8.2 mm pitch an...

The Weidmuller 1469510000 PRO ECO is a DIN rail AC/DC power supply with 480W output power at 24VDC/20A. Wide-range AC input (85-264V) allows worldw...

The Weidmuller 2007100000 is a marker / label for industrial wiring. DEK 5/3.5mm WS Terminal Marker 5x3.5mm, White - set of 1000.Technical specific...

The Weidmuller AEP 2C 2.5 (order no. 1514400000) is an A-series end plate for Weidmuller A-series 2.5 mm² feed-through terminal blocks. Fitted to t...

The WAGO 281-101 is a 2-conductor through terminal block from the 281 Series, designed for simple and secure electrical connections in industrial a...

The UCT-WMCO 4,1 (12X4) is a clip-on wire marking sheet from Phoenix Contact's UniCard labeling range, designed for subsequent conductor identifica...

The Phoenix Contact EBS 2- 8 is a 2-position insertion bridge with an 8 mm pitch, used to electrically parallel adjacent terminal blocks in DIN rai...

The Weidmuller A2C 1,5 is a WDU feed-through terminal block, 2mm2, 500V, 5A, Blue. For general conductor feed-through in control panels. DIN rail m...

The Weidmuller WAP WTL6/3 is a WTL test-disconnect terminal, 6mm2, V, A. Allows circuit testing and disconnection without removing wiring. DIN rail...

The Phoenix Contact FBS 5-5 is a plug-in bridge that interconnects five adjacent modular terminal blocks at a 5.2 mm pitch, enabling efficient pote...