Power and Connectors

The WAGO 2273-208 is an 8-conductor PUSH WIRE® splicing connector from the 2273 Series, designed for fast, tool-free connections of solid conductor...

The Phoenix Contact PT 1,5/S is a feed-through terminal block from the PT product family, offering tool-free push-in conductor connection rated at ...

The D-UT 2,5/10 is a gray end cover from Phoenix Contact for closing and protecting rows of UT-series terminal blocks on DIN rail assemblies. Manuf...

The Phoenix Contact D-ST 4 (catalog number 3030420) is a gray end cover designed to close off terminal block assemblies, providing a clean and safe...

The ZB 5,LGS:FORTL.ZAHLEN 21-30 is a Phoenix Contact Zack marker strip pre-printed with consecutive numbers 21 through 30 for clear and permanent t...

The Weidmuller WAP 2,5-10 is a WAP W-Series end plate, Beige. Closes off the end of a W-Series terminal block assembly on DIN rail.Technical specif...

The WAGO 2002-1401 is a 4-conductor through terminal block in the TOPJOB S 2002 Series, rated 800 V / 24 A per IEC/EN 60947-7-1 and approved for Ex...

The WAGO 210-722 is a set of three operating tools with partially insulated metal shafts, supplied in a box. Suitable for use with terminal block a...

The Phoenix Contact ATP-ST 4 is a partition plate for DIN rail terminal block assemblies, providing physical and electrical separation between adja...

The WAGO 793-5566 is a WMB marking card pre-marked with consecutive numbers 1 to 50, with the full sequence repeated twice across the card, for hor...

The Phoenix Contact PTFIX 6/18X2,5 GNYE is a single-row distributor terminal block for power distribution without protective conductor function. It...

The Schneider Electric LGYT1E24 is a Linergy earth terminal block with 24 connection points, combining screw and screwless (push-in) terminals for ...

The Phoenix Contact D-PT 6 (catalog number 3212044) is an end cover designed to close and protect the open ends of PT 6 terminal block assemblies. ...

The Phoenix Contact PT 2,5-TWIN is a feed-through terminal block that connects three conductors in a single 5.2 mm wide unit, rated 800 V and 24 A ...

The Phoenix Contact D-ST 2,5-TWIN is an end cover designed to terminate DIN rail terminal block assemblies, providing mechanical protection at the ...

The WAGO 221-615 is a 5-conductor splicing connector with levers from the 221 Series, designed for fault-free electrical installations. It accepts ...

The Phoenix Contact PT 6-PE is a protective conductor terminal block for grounding and earthing connections on NS 35/7.5 and NS 35/15 DIN rails. It...

The Phoenix Contact FBS 2-3,5 is a plug-in bridge designed for use with CLIPLINE complete modular terminal blocks, bridging two positions at a 3.5 ...

The Phoenix Contact PT 10 (catalog number 3212120) is a feed-through terminal block rated for 1000 V nominal voltage and 57 A nominal current with ...

The Phoenix Contact PT 1,5/S-PE is a 1.5 mm² push-in protective conductor terminal block for DIN rail grounding in industrial control panels. Tool-...

The Phoenix Contact SK 8 is a shield connection clamp for terminating cable shields on neutral busbars, achieving a contact resistance below 1 mΩ. ...

The Phoenix Contact PT 1,5/S-QUATTRO is a multi-conductor feed-through terminal block from the PT product family, rated at 500 V nominal voltage an...

The Weidmuller WDU 4 is a WDU feed-through terminal block, 4mm2, 800V, 32A, Beige. For general conductor feed-through in control panels. DIN rail m...

The FBS 50-3,5 BU is a 50-position plug-in bridge from Phoenix Contact, designed to parallel up to 50 terminal blocks in a single step using both b...