Power and Connectors

The Weidmuller 1991950000 is an AEP 2C WAP blue end plate for W-series (WAP mounting) terminal block groups. It provides a finished closure at the ...

The Phoenix Contact KSS 8 is a plug-in short-circuit connector designed to electrically bridge two adjacent terminal blocks on an 8 mm pitch. Built...

The Phoenix Contact ZB 3,5:UNBEDRUCKT is an unmarked Zack marker strip for modular terminal blocks and electronics modules with tall marker grooves...

The ZBF 6:UNBEDRUCKT is a flat Zack marker strip from Phoenix Contact designed for labeling modular terminal blocks and electronics modules with a ...

The Weidmuller 1674730000 is a end plate / partition for industrial wiring. TAPA ZAP/TW ZDK2.5 End Plate.Technical specifications: Part number: 167...

The Phoenix Contact FBS 6-8 is a 6-position plug-in bridge for the CLIPLINE complete terminal block system, designed to bridge multiple terminal bl...

The Weidmuller 1609801044 is a marker / label for industrial wiring. DEK 5/5 MC NE WS Terminal Marker, 5x5mm, White - set of 100.Technical specific...

The Weidmuller 1609860000 is a marker / label for industrial wiring. WS 12/5 MC NE WS Terminal Marker, 12x5mm, White - set of 72.Technical specific...

The PT 2,5-PE/L/N is a Phoenix Contact multi-level terminal block combining protective earth, line, and neutral connections in a single 5.2 mm wide...

The Phoenix Contact FBS 5-10 is a 5-position plug-in bridge for paralleling modular terminal blocks at a 10.2 mm pitch. With a maximum load current...

The Phoenix Contact ST 2,5-TWIN is a three-conductor spring-cage feed-through terminal block rated at 800 V nominal voltage and 24 A nominal curren...

The Phoenix Contact US-EML (15X6) is an adhesive device marker supplied in pre-punched sheets of 132 white (RAL 9010) polyester labels, each 15 mm ...

The Weidmuller 1527880000 ZQV 2.5N/10 BL is a 10-pole cross-connector (jumper) for 2.5mm2 terminal blocks, blue (neutral) colour. It links adjacent...

The WAGO 207-1432 is a Size 2 Gelbox Branch housing designed to protect 221 Series splicing connectors carrying cables up to 6 mm² in wet and damp ...

The WAGO 2002-406/000-005 is a 6-way insulated push-in type jumper bar for the 2002 series, designed to connect six adjacent rail-mount terminal bl...

The Weidmuller WDU 35N is a WDU feed-through terminal block, 35mm2, 500V, 125A, Beige. For general conductor feed-through in control panels. DIN ra...

The Phoenix Contact UK 6 N is a feed-through terminal block rated for 800 V and 41 A, using screw connection with a 6 mm² nominal cross section for...

The Phoenix Contact D-UDK 4 is an end cover designed to close and protect the ends of DIN rail-mounted terminal block assemblies. Measuring 1.5 mm ...

The Phoenix Contact UDK 4 is a 4-connection feed-through terminal block rated at 630 V and 32 A, designed for multi-conductor wiring on standard DI...

The P-ZB METER is a self-adhesive Zack marker strip carrier from Phoenix Contact, supplied in a 1 m length for cutting to any custom size. It accep...

The Phoenix Contact URTK/S is a test disconnect terminal block rated at 400 V and 41 A nominal current, designed for safe testing in current transf...

The Circutor Computer SMART III 6 (code R13851) is a three-phase power factor regulator for reactive energy compensation in low-voltage installatio...

The Meanwell XDR-75E-24 is a fanless ultra-slim AC-DC DIN rail power supply with a 24V 3.2A (75W) output, rated to Overvoltage Category III (OVC II...

The Meanwell NDR-120-24 is a fanless AC-DC DIN rail power supply with a 24V 5A (120W) output in a metal case. It accepts a universal input of 90-26...