Power and Connectors

The ZB 5,LGS:FORTL.ZAHLEN 81-90 is a Phoenix Contact Zack marker strip pre-printed with consecutive numbers 81 to 90. This 10-section terminal mark...

The FBS 2-16 is a 2-position plug-in bridge from Phoenix Contact designed to electrically connect adjacent terminal blocks in the CLIPLINE complete...

The WAGO 207-1332 is a branch gelbox from the 207 Series, designed to enclose WAGO 221 and 2x73 Series splicing connectors (not included) and seal ...

ZB 5,LGS:FORTL.ZAHLEN 41-50 is a Phoenix Contact Zack marker strip pre-printed with consecutive numbers 41 to 50 for horizontal terminal block iden...

The Weidmuller A2C 2,5 is a WPE protective earth terminal block, 2mm2, yellow-green. For PE conductor distribution in control panels. DIN rail moun...

The Weidmuller 1609820000 is a marker / label for industrial wiring. DEK 5/6 MC NE WS Terminal Marker, 5x6mm, White - pack of 100. Technical specif...

The Phoenix Contact FBS 10-5 BU is a 10-position plug-in bridge designed for the CLIPLINE complete system, enabling simultaneous bridging of up to ...

The Phoenix Contact ST 16-PE is a spring-cage protective conductor terminal block with a nominal cross section of 16 mm², engineered for fast, reli...

The WAGO 221-942 is a 2-way insulated jumper for conductor entry in the 221 Series splicing connector family. It plugs into open clamping units wit...

The WAGO 2102-5207 is a 2-conductor ground terminal block in the TOPJOB® S 2102 Series, designed for protective earth connections on DIN-rail 35×15...

The Phoenix Contact ST 4-MT is a knife-disconnect terminal block rated at 400 V nominal voltage and 20 A nominal current, using spring-cage connect...

The Weidmuller 1469490000 PRO ECO is a DIN rail AC/DC power supply with 240W output power at 24VDC/10A. Wide-range AC input (85-264V) allows worldw...

The Phoenix Contact ST 4 is a 1-level feed-through terminal block rated at 800 V nominal voltage and 32 A nominal current. Its spring-cage connecti...

The Weidmuller WDK 2,5 is a WDK two-level feed-through terminal, 2.5mm2. Double-deck design provides two connection levels in a single rail positio...

The Weidmuller 1527570000 ZQV 2.5N/3 is a 3-pole cross-connector (jumper) for 2.5mm2 terminal blocks, grey colour. It links adjacent terminal block...

The WAGO 2016-1304 is a 3-conductor through rail-mount terminal block from the TOPJOB S 2016 Series, certified for Ex e II and Ex i hazardous-area ...

The Phoenix Contact UT 4-HESILED 24 (5X20) is a fuse modular terminal block from the UT product family, designed for 5 x 20 mm glass or ceramic fus...

The Phoenix Contact UT 16 BU is a feed-through terminal block rated at 1000 V nominal voltage and 76 A nominal current, accepting conductors from 1...

The Circutor CLZ-FP-44/15-HD (code R2H54E) is a three-phase tubular power capacitor from the CLZ Heavy Duty range, intended for power factor correc...

The WAGO 249-119 is a gray group marker carrier designed for use as an additional group marker carrier or continuous marking strip carrier on termi...

The WAGO 2016-7792 is an end and intermediate plate for the TOPJOB S series (Product Group 22), designed to separate or terminate groups of rail-mo...

The Weidmuller A2C 10 is a WDU feed-through terminal block, 2mm2, 1000V, 57A, Blue. For general conductor feed-through in control panels. DIN rail ...

The ZB 5,LGS:FORTL.ZAHLEN 61-70 is a Phoenix Contact Zack marker strip pre-printed horizontally with consecutive numbers 61 to 70. This 10-section ...

The WAGO 2216-7792 is an end and intermediate plate, 1 mm thick, in orange, designed to terminate or divide groups of TOPJOB S rail-mount terminal ...