Power and Connectors

The Phoenix Contact US-WMTB (44X15) is a white (RAL 9010) PVC cable marker card for identifying cables with an external diameter greater than 13 mm...

The Circutor CLZ-FPT-44/6.25-HD (code R2H547) is a three-phase tubular power capacitor from the Heavy Duty range, rated at 6.25 kvar at 440 V and 5...

The WAGO 282-868 is a 3-conductor ground terminal block from the 282 Series, rated per IEC/EN 60947-7-2, designed to terminate protective earth con...

The Phoenix Contact ST 2,5-TWIN is a three-conductor spring-cage feed-through terminal block rated at 800 V nominal voltage and 24 A nominal curren...

The Phoenix Contact US-EML (15X6) is an adhesive device marker supplied in pre-punched sheets of 132 white (RAL 9010) polyester labels, each 15 mm ...

The WAGO 2016-7607 is a 2-conductor ground terminal block from the TOPJOB S 2016 Series, designed for DIN-35 rail mounting (35 x 15 and 35 x 7.5). ...

The Weidmuller 1988160000 is a terminal block for industrial wiring. AAP11 1.5 LI RD Modular Distribution Terminals, PUSH IN, 1.5mm² 500V 17.5A, Da...

The Weidmuller 1527880000 ZQV 2.5N/10 BL is a 10-pole cross-connector (jumper) for 2.5mm2 terminal blocks, blue (neutral) colour. It links adjacent...

The Weidmuller 1469510000 PRO ECO is a DIN rail AC/DC power supply with 480W output power at 24VDC/20A. Wide-range AC input (85-264V) allows worldw...

The Weidmuller 2007100000 is a marker / label for industrial wiring. DEK 5/3.5mm WS Terminal Marker 5x3.5mm, White - set of 1000.Technical specific...

The Weidmuller AEP 2C 2.5 (order no. 1514400000) is an A-series end plate for Weidmuller A-series 2.5 mm² feed-through terminal blocks. Fitted to t...

The WAGO 281-101 is a 2-conductor through terminal block from the 281 Series, designed for simple and secure electrical connections in industrial a...

The UCT-WMCO 4,1 (12X4) is a clip-on wire marking sheet from Phoenix Contact's UniCard labeling range, designed for subsequent conductor identifica...

The WAGO 2002-406/000-005 is a 6-way insulated push-in type jumper bar for the 2002 series, designed to connect six adjacent rail-mount terminal bl...

The Weidmuller WDU 35N is a WDU feed-through terminal block, 35mm2, 500V, 125A, Beige. For general conductor feed-through in control panels. DIN ra...

The Phoenix Contact EBS 2- 8 is a 2-position insertion bridge with an 8 mm pitch, used to electrically parallel adjacent terminal blocks in DIN rai...

The Weidmuller 0383560000 is a terminal block for industrial wiring. EW 35 End Bracket, Beige, TS 35, V-2, Wemid, Width: 8.5mm, 100 °C.Technical sp...

The Weidmuller A2C 1,5 is a WDU feed-through terminal block, 2mm2, 500V, 5A, Blue. For general conductor feed-through in control panels. DIN rail m...

The Weidmuller WAP WTL6/3 is a WTL test-disconnect terminal, 6mm2, V, A. Allows circuit testing and disconnection without removing wiring. DIN rail...

The Phoenix Contact FBS 5-5 is a plug-in bridge that interconnects five adjacent modular terminal blocks at a 5.2 mm pitch, enabling efficient pote...

The Weidmuller SH1 is an SH DIN rail support for W-Series terminal blocks. Provides additional mechanical support preventing lateral movement on 35...

The WAGO 221-423 is a 3-conductor splicing connector with levers from the 221 Series, designed to join solid, stranded, and fine-stranded copper co...

The UT 4-L/HESI (5X20) is a DIN rail-mounted fuse modular terminal block from Phoenix Contact, accepting G-type 5 x 20 mm glass or ceramic fuse-lin...

The Phoenix Contact PT 2,5-PE/L/L is a three-level multi-level ground terminal block for protective conductor (PE) and live conductor connections i...