Power and Connectors

The Weidmuller 1527930000 ZQV 4N/2 is a 2-pole cross-connector (jumper) for 4mm2 terminal blocks, grey colour. It links adjacent terminal block pos...

The Phoenix Contact AP 3-TU is a cover profile carrier designed for mounting on NS 32 or NS 35/7.5 DIN rails, providing a secure base for attaching...

The Weidmuller A2C 2,5 is a WDU feed-through terminal block, 2mm2, 800V, 24A, Blue. For general conductor feed-through in control panels. DIN rail ...

The WAGO 2002-406 is a 6-way insulated push-in type jumper bar from the TOPJOB S product group, designed to common multiple terminal positions acro...

The Weidmuller 2007110000 DEK 5/5 is a 5x5mm white terminal marker for labelling DIN rail terminal blocks. Write-on or print-on for circuit identif...

The Weidmuller AEP 2T is a WAP W-Series end plate, Beige. Closes off the end of a W-Series terminal block assembly on DIN rail.Technical specificat...

The Socomec 192T8097 is a bar-through current transformer from the TBA 100 range. It delivers a standard secondary current proportional to the prim...

The WAGO 2004-1201 is a 2-conductor through terminal block from the TOPJOB S series, rated 800 V and 32 A per IEC/EN 60947-7-1. It uses Push-in CAG...

The WAGO 2001-1201 is a 2-conductor through terminal block from the TOPJOB S 2001 Series, rated at 800 V and 17.5 A per IEC/EN 60947-7-1. It uses P...

The WAGO 2006-1691 is a 1 mm thick end and intermediate plate in gray, part of the TOPJOB S rail-mount terminal block system (Product Group 22). It...

The Weidmuller A2C 1,5 is a WPE protective earth terminal block, 2mm2, yellow-green. For PE conductor distribution in control panels. DIN rail moun...

The UCT-WMCO 2,9 (12X4) is a clip-on conductor marker from Phoenix Contact, designed for the subsequent labeling of wires with an external diameter...

The WAGO 2002-403/000-005 is a 3-way insulated push-in type jumper bar from the 2002 Series, designed to common adjacent rail-mount terminal blocks...

The Weidmuller 1712311001 is a terminal block for industrial wiring. KLBUE 4-13.5 SC Clamping Yoke for Shield Connection, Steel.Technical specifica...

The Circutor TP6 100/5 (code M78012) is a single-phase split-core current transformer rated 100/5 A with a 30 × 30 mm busbar and cable opening. The...

The WAGO 2001-1301 is a 3-conductor through terminal block from the TOPJOB S 2001 series, rated at 17.5 A and 800 V per IEC/EN 60947-7-1, suitable ...

The WAGO 2002-410 is a 10-way insulated push-in type jumper bar for the TOPJOB S series, designed to common up to 10 adjacent terminals without add...

The WAGO 2002-1492 is an end and intermediate plate for the TOPJOB S terminal block system (Product Group 22), supplied in orange and measuring 0.8...

The Phoenix Contact UCT1-TM 6 is a thermal transfer terminal block marker for Weidmuller, CONTA-CLIP, and Klemsan terminal block series. Each card ...

The Phoenix Contact EB 2- 8 is a 2-position insertion bridge designed to electrically connect adjacent terminal blocks mounted on a common rail, wi...

The Socomec TBA 100 (reference 192T8096) is a bar-through current transformer from the TBA 100 range, designed for accurate current measurement in ...

The Phoenix Contact FBS 6-8 is a 6-position plug-in bridge for the CLIPLINE complete terminal block system, designed to bridge multiple terminal bl...

The Phoenix Contact SK 5 is a shield connection clamp designed to ground cable shields directly onto neutral busbars with a contact resistance of l...

The Phoenix Contact FBS 4-8 is a 4-position plug-in bridge designed for use in the CLIPLINE complete terminal block system. With an 8.2 mm pitch an...