Power and Connectors

The WAGO 2002-1201 is a 2-conductor through terminal block from the TOPJOB S 2002 Series, designed for through-wiring in industrial and building in...

The WAGO 243-304 is a 4-conductor MICRO PUSH WIRE splicing connector from the 243 Series, designed for junction box use in low-voltage building ins...

The WAGO 222-413 is a 3-conductor splicing connector with levers from the 222 Series, designed for all conductor types - solid, stranded, and fine-...

The WAGO 2273-500 is a mounting carrier for 2273 Series push wire connectors, supporting both single- and double-row connector arrangements on DIN-...

The WAGO 221-612 is a 2-conductor splicing connector with levers from the 221 Series, designed to join all copper conductor types - solid, stranded...

The WAGO 224-101 is a 1-pole lighting connector from the 224 Series (PUSH WIRE®), designed for quick and reliable termination between fixed install...

The WAGO 210-719 is a metal operating tool with a 2.5 x 0.4 mm blade and a partially insulated shaft, intended for actuating CAGE CLAMP® terminal b...

The WAGO 207-1431 is a Gelbox Branch for use with 221 Series splicing connectors up to 6 mm², providing IPX8-rated waterproof protection for conduc...

The WAGO 221-625 is a 5-conductor splicing connector with levers from WAGO's 221 Series, connecting solid, stranded, and fine-stranded copper condu...

The WAGO 793-5472 is a pre-printed WMB marker card supplied ready-marked with the standard electrical distribution symbols L1, L2, L3, N, and PE in...

The WAGO 2001-405 is a 5-way insulated push-in type jumper from the TOPJOB S series, used to common adjacent terminals in the 2001 Series rail-moun...

The WAGO 2002-406/000-006 is a 6-way insulated push-in type jumper bar in blue, used to common multiple terminal blocks across six positions (assig...

The WAGO 2002-1207 is a 2-conductor ground terminal block from the TOPJOB® S 2002 Series, designed for DIN-35 rail mounting with a nominal cross-se...

The WAGO 2002-407/000-006 is a 7-way insulated push-in type jumper bar for the TOPJOB S 2002 Series rail-mount terminal blocks. Rated at 800 V (III...

The WAGO 221-2431 is a 2-conductor inline splicing connector with levers from the 221 Series, designed for tool-free in-line connections of solid, ...

The WAGO 2016-7714 is a 1-conductor N-disconnect terminal block from the TOPJOB S 2016 Series, rated 76 A at 250 V per IEC/EN 60947-7-1 (overvoltag...

The WAGO 2203-7641 is a multilevel installation terminal block from the 2203 Series, designed to streamline wire connections in DIN-rail mounted en...

The WAGO 2002-1404 is a 4-conductor through terminal block from the TOPJOB S 2002 Series, rated at 24 A and 800 V per IEC/EN 60947-7-1, designed fo...

The WAGO 221-942/000-006 is a 2-way insulated jumper for the 221 Series splicing connectors, designed to extend N and PE (ground) distribution betw...

The WAGO 2203-7646 is a multilevel installation terminal block from the 2203 Series, combining neutral, live, and protective earth connections in o...

The WAGO 249-117 is a screwless end stop, 10 mm wide, designed to secure rail-mount terminal blocks against movement on DIN-35 rails per DIN EN 607...

The WAGO 2202-1611/1000-541 is a 2-conductor fuse terminal block from the 2202 Series, designed to hold a 5 x 20 mm cylindrical miniature metric fu...

The WAGO 2016-7604 is a 2-conductor supply terminal block from the TOPJOB S 2016 Series, designed for fault-free electrical installations in distri...

The WAGO 2216-7714 is a 1-conductor N-disconnect terminal block from the 2216 Series, built for quick and easy conductor connections on DIN-35 rail...