WAGO 2002-2201 TOPJOB S Double-Deck Terminal Block 2.5mm² 24A Grey Pack 50

The WAGO 2002-2201 is a double-deck through terminal block from the TOPJOB S 2002 Series, rated 500 V and 24 A per IEC/EN 60947-7-1. It uses Push-in CAGE CLAMP technology across 4 clamping units arranged on 2 levels, accepting solid and fine-stranded conductors from 0.25 to 4 mm² (22 to 12 AWG). The block is certified for Ex e II hazardous area installations per ATEX PTB 03 ATEX 1162 U and IECEx PTB 03.0004U (Ex eb IIC Gb).

Sold as a pack of 50 pieces.

Technical specifications:

• Catalog number: 2002-2201
• Manufacturer: WAGO
• Series: TOPJOB S 2002
• Type: Double-deck through terminal block, L/L potential marking
• Connection technology: Push-in CAGE CLAMP
• Nominal cross-section: 2.5 mm²
• Conductor range: 0.25 - 4 mm² / 22 - 12 AWG (solid and fine-stranded)
• Strip length: 10 - 12 mm
• Rated voltage (IEC/EN 60947-7-1): 500 V; rated impulse withstand voltage: 6 kV
• Rated current (IEC/EN 60947-7-1): 24 A
• Ex e II rated voltage / current (ATEX/IECEx): 440 V / 20 A
• Levels: 2 | Clamping units: 4 | Jumper slots: 4
• Mounting: DIN-35 rail (35 x 15 and 35 x 7.5 mm)
• Dimensions W x H x D: 5.2 x 69.7 x 51.7 mm
• Color: gray | Weight: 10 g
• Insulation material: Polyamide (PA66), UL 94 V0
• Processing temperature: -35 to +85°C; continuous operating temperature: -60 to +105°C
• Standards: IEC/EN 60947-7-1, UL 1059, CSA 22.2 No. 158, DIN EN 50155, DIN EN 61373
• Ex classification: Ex eb IIC Gb (ATEX PTB 03 ATEX 1162 U / IECEx PTB 03.0004U)
• Pack quantity: 50

Features and benefits:

• Push-in CAGE CLAMP allows tool-free direct insertion of solid conductors (0.75 - 4 mm²) and fine-stranded conductors with ferrules (1 - 2.5 mm²); an operating tool is used for smaller or unferruled conductors
• Double-deck L/L design delivers two independent through-potentials in a 5.2 mm width, reducing panel footprint compared to single-deck blocks
• Certified for Ex e II (increased safety) hazardous area wiring at 440 V / 20 A per ATEX and IECEx
• Qualified per DIN EN 50155 and DIN EN 61373 for railway rolling stock vibration and shock (Category 1, Class A/B)
• Four jumper slots with center/side marking capability and front-entry wiring for flexible circuit configuration

Applications:

• Distributing two independent L/L circuits within a single DIN-rail terminal in control and distribution panels
• Hazardous area (Ex e II / Zone 1) installations requiring ATEX- and IECEx-certified terminal connections
• Railway rolling stock electrical systems qualified to DIN EN 50155
• Industrial control cabinets requiring compact double-deck wiring of 0.25 - 4 mm² conductors

Also known as: WAGO 2002-2201, WAGO TOPJOB S double-deck push-in terminal block, WAGO 2002 series through terminal block.