Phoenix Contact Components | Terminal Blocks & More

The Phoenix Contact PT 4-PE is a protective conductor terminal block providing a low-resistance connection to ground potential via direct DIN rail ...

The Phoenix Contact D-PT 2,5-PE/3L is an end cover designed to provide a clean, insulated closure at the end of PT 2.5 terminal block assemblies. C...

The Phoenix Contact PT 2,5-PE/3L is a four-level motor terminal block for compact motor connections in industrial control panels. Push-in connectio...

The Phoenix Contact PT 1,5/S-QUATTRO is a multi-conductor feed-through terminal block from the PT product family, rated at 500 V nominal voltage an...

The Phoenix Contact FBS 10-5 BU is a 10-position plug-in bridge designed for the CLIPLINE complete system, enabling simultaneous bridging of up to ...

The Phoenix Contact FBS 10-6 is a 10-position plug-in bridge designed to parallel adjacent terminal blocks in the CLIPLINE complete system. With a ...

The Phoenix Contact ATP-ST 6 is a partition plate designed to provide physical separation and electrical isolation between adjacent terminal blocks...

The Phoenix Contact B-STIFT is a disposable marker pen designed for manually labeling unprinted Zack marker strips. It produces indelible, smear-pr...

The Phoenix Contact ZBF 5:UNBEDRUCKT is a flat Zack marker strip designed to identify modular terminal blocks and electronics modules on a 5 mm pit...

The Phoenix Contact VAL-MS-T1/T2 335/12.5/3+1 is a universal varistor-based plug-in lightning and surge arrester for 3-phase TN-S and TT power supp...

The Phoenix Contact PT 2,5-TWIN BU is a three-conductor feed-through terminal block rated at 800 V and 24 A, using tool-free push-in connection for...

The Phoenix Contact UTME 4 is a compact test disconnect terminal block rated at 500 V and 28 A nominal current for use in industrial control and au...

The Phoenix Contact D-PTI/3B is an end cover that closes and protects the end of terminal block rows, providing a neat finish to DIN rail assemblie...

The PT 2,5-PE/L/N is a Phoenix Contact multi-level terminal block combining protective earth, line, and neutral connections in a single 5.2 mm wide...

The Phoenix Contact SKS 14 is a shield connection terminal block designed for applying cable shields directly to busbars. Using spring-cage connect...

The Phoenix Contact D-UT 16 (catalog number 3047206) is an end cover designed to terminate and protect DIN rail terminal block assemblies. Manufact...

The Phoenix Contact ST 4-MT is a knife-disconnect terminal block rated at 400 V nominal voltage and 20 A nominal current, using spring-cage connect...

The Phoenix Contact D-ST 2,5-3L is an end cover designed to close and insulate the open ends of D-ST series terminal block assemblies on DIN rails....

The Phoenix Contact PLC-RPT- 24UC/21 is a plug-in relay module from the PLC-INTERFACE series for NS 35/7.5 DIN rail, combining a Push-in terminal b...

The Phoenix Contact SZS 0,4X2,0 is a precision micro screwdriver with a bladed tip measuring 0.4 mm thick by 2.0 mm wide and a 60 mm blade length, ...

The Phoenix Contact UT 16 BU is a feed-through terminal block rated at 1000 V nominal voltage and 76 A nominal current, accepting conductors from 1...

The D-PT 4-PE/3L is a Phoenix Contact end cover for DIN rail terminal block assemblies, closing and insulating the end of a terminal strip. At 2.2 ...

The Phoenix Contact PT 4-PE/3L is a four-level motor terminal block using push-in connection, rated 26 A at 800 V with conductor cross-sections fro...

The Phoenix Contact FBST 500-PLC RD is a continuous plug-in bridge rated for a maximum load current of 32 A, designed to parallel multiple terminal...