In Stock

The ABB S203-C16 (article 2CDS253001R0164) is a 3-pole, 16 A miniature circuit breaker from the S200 System pro M compact range, featuring a C trip...

The Knipex 70 06 125 is a 125 mm diagonal cutter designed for electricians, mechatronics engineers, and electronics technicians. Its slim head prof...

The Knipex 12 40 200 is a 200 mm self-adjusting wire stripper designed for effortless, damage-free stripping across a wide conductor range of 0.03 ...

The Knipex 08 26 145 is a 145 mm needle-nose combination pliers manufactured from chrome vanadium steel with a full chrome finish, designed for gri...

The Schneider Electric LAD8N11 is a TeSys D auxiliary contact block featuring a 1NO+1NC contact arrangement with screw terminal connection. Designe...

The Hager VS312PD is a Golf series surface-mounted distribution board with 3 rows of 12 DIN rail module positions each (36 modules total), rated IP...

The Hager SBN340 is a 3-pole load break switch (disconnector) rated at 40 A, designed for safe isolation of three-phase AC circuits in DIN rail-mou...

The Hager MC102A is a Hager miniature circuit breaker, 1P, 2 A, C curve, 6kA. For final circuit protection. Mounts on 35mm DIN rail.Technical spec...

The Hager KC325 is a 3-pole connection bridge with pin connection for phase conductors, spanning 125 mm, for use in distribution boards and modular...

The ABB HKF1-11 (article 1SAM201901R1001) is an auxiliary contact module for front mounting on ABB manual motor starters. It provides one normally ...

The ABB MS116-2.5 (article 1SAM250000R1007) is a compact 45 mm wide manual motor starter with a current setting range of 1.6 A to 2.5 A. It lets op...

The Schneider Electric Acti9 iCT (A9C20833) is a 3-pole contactor from the Acti9 range, rated 25 A at AC-7A utilisation category with a 220-240 V A...

The Legrand 419139 is an RX³ miniature circuit breaker (MCB), 1-pole, rated 32 A on the B tripping curve, for 230 V installations. It has a short-c...

The Legrand 402037 is a residual current device, 2-pole, rated 40 A with 30 mA A-type sensitivity for 230 V installations. It occupies 2 modules on...

The Schneider Electric ATV320U75N4C is a compact variable frequency drive from the Altivar Machine ATV320 series, designed for complex machine appl...

The ABB MS116-1.6 (article 1SAM250000R1006) is a manual motor starter - also referred to as a motor protection circuit breaker or manual motor prot...

The ABB MS116-16 (article 1SAM250000R1011) is a manual motor starter - also referred to as a motor protection circuit breaker or manual motor prote...

The XB5AK133B5 is a green illuminated selector switch from Schneider Electric's Harmony XB5 range, intended for 22.5 mm panel mounting in industria...

The Schneider Electric WDE000523 is a Cedar Plus double socket outlet with side earthing, rated at 16 A / 250 V AC, designed for surface-mount inst...

The WAGO 222-413 is a 3-conductor splicing connector with levers from the 222 Series, designed for all conductor types - solid, stranded, and fine-...

The Eaton T0-3-8401/I1 is a 20 A reversing switch from the Moeller T0 series, designed for surface mounting with a maintained 1-0-2 switching actio...

The Legrand 419203 is an RX³ miniature circuit breaker (MCB), 1-pole, rated 20 A on the C tripping curve, for 230 V installations. It has a short-c...

The Schneider Electric VCF4 is a TeSys Vario 3-pole emergency stop switch disconnector rated at 80 A, designed for door mounting in industrial cont...

The Phoenix Contact ATP-UT (catalog number 3047167) is a partition plate designed to separate and organize terminal blocks within DIN rail assembli...