In Stock

The Hager VU24NE is a Hager FW distribution board, module capacity, IP30, surface-mounted. For DIN rail circuit breaker installation in domestic a...

The Hager VS104PD is a Golf series surface-mounted distribution board with 1 row of 4 DIN rail module positions, rated IP40. Supplied with pre-wire...

The Hager VS212PD is a Golf series surface-mounted distribution board with 2 rows of 12 DIN rail module positions each (24 modules total), rated IP...

The Hager SBN340 is a 3-pole load break switch (disconnector) rated at 40 A, designed for safe isolation of three-phase AC circuits in DIN rail-mou...

The Hager SBN325 is a 3-pole load break switch (Ausschalter) rated at 25 A and 400 V AC, designed for DIN rail mounting in distribution boards and ...

The Hager MC110A is a Hager miniature circuit breaker, 1P, 10 A, C curve, 6kA. For final circuit protection. Mounts on 35mm DIN rail.Technical spe...

The Hager MC313A is a Hager miniature circuit breaker, 3P, 13 A, C curve, 6kA. For final circuit protection. Mounts on 35mm DIN rail.Technical spe...

The Hager MB332A is a Hager MB1 miniature circuit breaker, 3P, 32 A, B curve, 6kA. For final circuit protection. Mounts on 35mm DIN rail.Technical ...

The Hager MB110A is a Hager MB1 miniature circuit breaker, 1P, 10 A, B curve, 6kA. For final circuit protection. Mounts on 35mm DIN rail.Technical ...

The Hager HLF399S is a Hager HLF miniature circuit breaker, 3P, 125 A, C curve, 10kA. For final circuit protection. Mounts on 35mm DIN rail.Technic...

The Hager CD440J is a Hager CD series RCCB, 4P, 40 A, 30mA, Type A. For earth leakage protection in domestic and commercial distribution boards. Mo...

The Siemens 3RV2925-5AB is a SIRIUS 3-phase supply terminal designed for 3-phase busbar connection from the top, compatible with SIRIUS circuit bre...

The Nidec C200-03400094A10100AB100 is a Commander C200 variable frequency drive (VFD) for three-phase 400V AC induction motors up to 4kW. It delive...

The ABB MS116-25 (article 1SAM250000R1014) is a compact 45 mm manual motor starter, also referred to as a motor protection circuit breaker or manua...

The ABB MS116-20 (article 1SAM250000R1013) is a compact manual motor starter with a current setting range of 16 to 20 A and a housing width of 45 m...

The Eaton HN-B32/3 is a 3-pole miniature circuit breaker from the Moeller series xPole Home range, providing overcurrent and short-circuit protecti...

The Schneider Electric VCF01 is a TeSys Vario 3-pole door-mounted emergency stop switch disconnector rated at 20 A (Ith) and 690 V AC. A red rotary...

The Schneider Electric GV2G354 is a Linergy FT comb busbar, a 3-pole connection accessory rated at 63 A with a 54 mm pitch, designed for use with T...

The Telemecanique ZCKD41 is a limit switch head from the Limit switches XC Standard range, designed to pair with XCKS, XCKL, and XCKM series limit ...

The REL-MR-230AC/21-21/MS is a Phoenix Contact plug-in miniature relay with 2 changeover contacts and a 230 V AC coil, suited for panel-mount autom...

The Siemens 3RW3017-1BB14 is a SIRIUS series soft starter in size S00, rated at 12.5 A and 5.5 kW at 400 V / 40 °C. It controls the starting and st...

The WAGO 243-504 is a MICRO PUSH WIRE® splicing connector from the 243 Series, designed for junction box wiring in low-voltage building installatio...

The Legrand 419172 is an RX³ miniature circuit breaker (MCB), 3-pole, rated 32 A on the B tripping curve, for 400 V installations. It has a short-c...

The Legrand 419164 is an RX³ miniature circuit breaker (MCB), 2-pole, rated 63 A on the B tripping curve, for 400 V installations. It has a short-c...