In Stock

The Schneider Electric GV3L80 is a 3-pole magnetic motor protection circuit breaker from the TeSys GV3 range, designed to protect motors and motor ...

The Lapp 4510032 is an H05V-K single-core flexible cable with 0.75mm² cross-section in brown PVC insulation, supplied as a 100m coil. Rated 300/500...

The Eaton HNC-40/2/003 is a 2-pole Type AC RCCB from the Eaton Moeller xPole series, rated 40 A with a 30 mA residual fault current and 6 kA short-...

The Schneider Electric SDD114502 is a universal LED dimmer from the Sedna Design & Elements wiring device range, finished in Anthracite. Rated ...

The Siemens 3RH2911-2HA22 is a SIRIUS front-mounted auxiliary switch with 2 NO + 2 NC instantaneous contacts, designed to snap onto the front of 3R...

The Schneider Electric VCF3GE is a TeSys VARIO emergency stop switch disconnector in an enclosure, rated 50 A at 690 V AC. Designed for high-perfor...

The Schneider Electric LV432593 is a long terminal cover accessory designed for ComPacT NSX and EasyPact CVS moulded-case circuit breakers, providi...

The Schneider Electric LAD9ET1S is a red safety protective cover designed for TeSys Deca contactors, classified as an installation accessory. Compa...

The Schneider Electric C16N4 is the 4-pole ComPacT NSX160N moulded-case circuit breaker (MCCB) basic frame — a chassis supplied without a trip unit...

The Eaton PL6-C4/1 is a single-pole miniature circuit breaker from the Eaton Moeller series xPole range, designed to protect circuits against overc...

The WAGO 221-500 is a mounting carrier for the 221 Series, designed to hold 2-, 3-, and 5-conductor 221 Series Splicing Connectors (4 mm²) on a DIN...

The Eaton M22-D-B is a flat, momentary pushbutton from the RMQ-Titan M22 series with a blue, blank actuator and titanium bezel for Ø 22.5 mm panel ...

The Eaton M22-LEDC230-W is a white LED element from the Moeller series M22 range, designed for base-fixing panel-mounted status signalling. It acce...

The WAGO 2102-5207 is a 2-conductor ground terminal block in the TOPJOB® S 2102 Series, designed for protective earth connections on DIN-rail 35×15...

The WAGO 2102-5204 is a 2-conductor through terminal block from the TOPJOB® S 2102 Series, designed for fast, reliable wire connections in industri...

ABB PSR3-600-70 (article 1SFA896103R7000) is a compact softstarter for small three-phase motors, providing smooth acceleration and deceleration to ...

The Legrand 038216 is a CAB 3 cable marker showing the number "6" on a blue ring, sized for wire cross-sections 0.5 to 1.5 mm². It is supplied as a...

The Legrand 038213 is a CAB 3 cable marker showing the number "3" on a orange ring, sized for wire cross-sections 0.5 to 1.5 mm². It is supplied as...

The Weidmuller 2007190000 WS 12/5 is a 12x5mm white terminal marker for labelling DIN rail terminal blocks. Write-on or print-on for circuit identi...

The Schelinger GKL-AC-C16 is a residual current circuit breaker with overcurrent protection (RCBO) from the Schelinger GKL series. It is rated for ...

The Legrand 402032 is a residual current device, 2-pole, rated 25 A with 300 mA AC-type sensitivity for 230 V installations. It occupies 2 modules ...

The LC1D95BD is a 3-pole TeSys D series contactor from Schneider Electric, designed for motor switching and load control in industrial AC power cir...

The Giovenzana GM483 is a PQ04-format maintenance station combining a green LED status indicator, up and down control pushbuttons, and a protected ...

The Knipex 03 02 160 is a 160mm combination plier finished in black atramentized chrome vanadium steel, designed for gripping, holding, bending, an...