In Stock

The Schneider Electric C40N4 is a ComPacT NSX400N moulded-case circuit breaker (MCCB) basic frame from the Compact NSX new generation range. It is ...

The WAGO 2003-6641 is a 3-level multilevel installation terminal block from the TOPJOB S 2003 Series, combining neutral (NTi), line (L), and protec...

The Schneider Electric Asfora EPH4300171 is an RJ45 Cat.5e UTP data outlet from the Asfora wiring device range, finished in Anthracite and supplied...

A single socket outlet from the Schneider Electric Asfora range, finished in White. The unit is supplied without a cover frame and connects via scr...

The Lapp 4520041 is an H07V-K single-core flexible cable with 1.5mm² cross-section in Red PVC insulation, supplied as a 100m coil. Rated 450/750V w...

The Lapp 4510052 is an H05V-K single-core flexible cable with 0.75mm² cross-section in white PVC insulation, supplied as a 100m coil. Rated 300/500...

The WAGO 793-5566 is a WMB marking card pre-marked with consecutive numbers 1 to 50, with the full sequence repeated twice across the card, for hor...

The ABB 20 EUC-94-507 (article 2CKA002011A3855) is a double-pole socket outlet from the ABB Basic55 design range, finished in alpine white. It feat...

The ABB 2511-94-507 (article 2CKA001725A1479) is a single-gang cover frame from the Basic55 range, finished in alpine white. It provides a decorati...

The WAGO 2002-1407 is a 4-conductor ground terminal block from the TOPJOB S series (2002 Series), designed for simple and secure grounding connecti...

The Legrand 412523 CX³ is a 2-pole DIN rail contactor rated 25A at 230V with 2 normally-open (2NO) contacts. It is designed for switching resistive...

The Schneider Electric Asfora EPH4200121 is a single RJ11 telephone outlet finished in white, supplied complete with a cover frame as part of the A...

The Schneider Electric Acti9 K60N is a 3-pole miniature circuit breaker (MCB) from the Acti9 range, designed for overload and short-circuit protect...

ABB MS116-12 (article 1SAM250000R1012) is a compact manual motor starter - also known as a motor protection circuit breaker or manual motor protect...

The Eaton M22-DRL-G is a flush-mounted, maintained illuminated pushbutton actuator from the RMQ-Titan M22 series, with a green actuator and titaniu...

The Schneider Electric LRD32 is a TeSys Deca differential thermal overload relay for motor protection, offering an adjustable current setting of 23...

The Lapp 4510011 is an H05V-K single-core flexible cable with 0.5mm² cross-section in black PVC insulation, supplied as a 100m coil. Rated 300/500V...

The Eaton M22-R1K is a classical single-turn potentiometer from the Moeller M22 series, rated at 1000 Ohm and 0.5 W. Designed for Ø 22.5 mm panel c...

The WAGO 2216-7601 is a 2-conductor supply terminal block from the 2216 Series, designed for distribution boxes. It serves as both a through termin...

The Knipex 98 54 is a 190 mm cable knife designed for stripping and cutting cables and insulation in electrical installation work. The insulating m...

The Schneider Electric A9R61440 is an Acti 9 iID 4-pole residual current circuit breaker (RCCB) with a rated current of 40 A and 30 mA residual-cur...

The Schneider Electric XB7EV07BP is a round LED pilot light from the Harmony XB7 range, designed for 22mm panel cut-out mounting and used for contr...

The Knipex 26 26 200 is a 200 mm stork beak pliers combining long flat-round tapering jaws with integrated side cutting edges for gripping and wire...

The Eaton PF6-40/4/003-A is a 4-pole, 40 A residual current circuit breaker (RCCB) from the Eaton Moeller xPole series, offering 30 mA type A trip ...