In Stock

The Hager CD425J is a Hager CD series RCCB, 4P, 25 A, 30mA, Type A. For earth leakage protection in domestic and commercial distribution boards. Mo...

The Runpotec 10197 GF3 is a cable pulling tool with a 3mm diameter fibreglass rod measuring 30m in length. It is the version without a digital mete...

ABB PSR105-600-70 (article 1SFA896115R7000) is a compact three-phase softstarter with a rated maximum operational current of 105 A. It controls mot...

The Apator ARS 630-6-2V pro (reference 63-011802-031) is a 3-pole NH size 3 in-line (vertical strip) high rupturing capacity (HRC) fuse switch-disc...

The Apator 1119510081T is an aluminium V-clamp single-conductor terminal in the SW-B range, accepting conductors from 35 to 300 mm². It is a V-type...

The Schneider Electric RXM4AB2F7 is a miniature plug-in relay from the Harmony Electromechanical Relays range, part of the Zelio RXM series. It pro...

The Schneider Electric LUB120 is a 3-pole, 12 A non-reversing power base from the TeSys Ultra range, designed for motor control and motor protectio...

The Schelinger GKR-A-B16 is a residual current circuit breaker with overcurrent protection (RCBO) from the Schelinger GKR series. It is rated for 1...

The Schelinger GKL-AC-B06 is a residual current circuit breaker with overcurrent protection (RCBO) from the Schelinger GKL series. It is rated for ...

The Eaton PL7-C20/3 is a three-pole miniature circuit breaker (MCB) from the Moeller series xPole range, rated at 20 A with type C tripping charact...

The WAGO 2003-7645 is a three-level multilevel installation terminal block from the 2003 Series (TOPJOB S), designed for L/L/PE potential distribut...

The WAGO 782-317 is an end and intermediate plate for TOP JOB Installation Terminal Blocks (Product Group 17). Measuring 1.5 mm wide, it fits betwe...

The WAGO 782-604 is a 2-conductor through terminal block from the 782 Series, rated 1000 V and 41 A per IEC/EN 60947-7-1, and suitable for Ex i (in...

The WAGO 782-607 is a 2-conductor ground terminal block from the 782 Series, designed for protective earth connections on DIN-35 rail (35 × 15 mm a...

The WAGO 221-2421 is a 221 Series inline splicing connector with levers, designed for connecting solid, stranded, and fine-stranded copper conducto...

The WAGO 207-1373 is a Size 2 Gelbox for inline cable connections, designed for use with 221 Series max. 4 mm² splicing connectors (sold without sp...

The WAGO 207-1332 is a branch gelbox from the 207 Series, designed to enclose WAGO 221 and 2x73 Series splicing connectors (not included) and seal ...

The WAGO 207-1331 is a Size 1 Gelbox branch from the 207 Series, designed to enclose and seal cable splices made with WAGO 221 Series and 2x73 Seri...

The Knipex 90 20 185 Plasticut is a 185 mm cutter designed for clean, right-angle cuts through thin-walled plastic pipes, plastic conduit, and flex...

The Knipex 87 09 180 V01 is a set of 3 pairs of plastic replacement jaws designed for Knipex Cobra 87xx series pliers in the 180 mm size. The smoot...

The Siemens 3RT2038-1KB40 is a SIRIUS 3RT2 series power contactor rated at 80 A / 37 kW at 400 V (AC-3/AC-3e), 3-pole, with a 24 V DC control coil....

The Siemens 3RT2025-1AP00-1AA0 is a SIRIUS 3RT2 series 3-pole power contactor rated at 17 A and 7.5 kW at 400 V for AC-3/AC-3e duty. It operates on...

The Siemens 3RT1054-1AV36 (MLFB: 3RT1054-1AV36) is a SIRIUS series 3-pole power contactor rated at 115 A and 55 kW at 400 V under AC-3/AC-3e duty. ...

The Siemens 3RT2015-1AP01 is a SIRIUS 3RT2 series 3-pole power contactor rated 7 A / 3 kW at 400 V in AC-3 duty, controlled by a 230 V AC coil at 5...