DIN Rail Terminal Blocks

The WAGO 2216-7714 is a 1-conductor N-disconnect terminal block from the 2216 Series, built for quick and easy conductor connections on DIN-35 rail...

The Phoenix Contact ZBF 5,LGS:FORTL.ZAHLEN is a flat Zack marker strip for systematic labeling of modular terminal blocks and electronics modules a...

The Weidmuller A2C 2,5 is a WPE protective earth terminal block, 2mm2, yellow-green. For PE conductor distribution in control panels. DIN rail moun...

The Phoenix Contact PT 6 BU is a blue feed-through terminal block rated at 1000 V nominal voltage and 41 A nominal current. It uses tool-free push-...

The Weidmuller WDU 4 is a WDU feed-through terminal block, 4mm2, 800V, 32A, Blue. For general conductor feed-through in control panels. DIN rail mo...

The Phoenix Contact PTTB 4 is a double-level push-in terminal block from the PT family, integrating two separate circuits in a compact unit rated a...

The Phoenix Contact D-ST 2,5-3L is an end cover designed to close and insulate the open ends of D-ST series terminal block assemblies on DIN rails....

The Weidmuller 2007190000 WS 12/5 is a 12x5mm white terminal marker for labelling DIN rail terminal blocks. Write-on or print-on for circuit identi...

The Weidmuller AEP 2C 6 (order no. 1991970000) is an A-series end plate for Weidmuller A-series 6 mm² feed-through terminal blocks. Fitted to the e...

The Weidmuller 2490390000 is an AEP 2C WAP blue end plate for W-series (WAP mounting) terminal block groups. It provides a finished closure at the ...

The Phoenix Contact ST 4-MT is a knife-disconnect terminal block rated at 400 V nominal voltage and 20 A nominal current, using spring-cage connect...

The Weidmuller A2C 4 is a WPE protective earth terminal block, 2mm2, yellow-green. For PE conductor distribution in control panels. DIN rail mounti...

The Phoenix Contact UT 35 IB BU is a feed-through terminal block rated at 1000 V nominal voltage and 125 A nominal current, built for high-current ...

The Phoenix Contact ST 2,5-QUATTRO is a spring-cage feed-through terminal block with four connections, rated 800 V and 24 A, built for compact mult...

The Phoenix Contact UT 4-HESILED 24 (5X20) is a fuse modular terminal block from the UT product family, designed for 5 x 20 mm glass or ceramic fus...

The D-PT 4-PE/3L is a Phoenix Contact end cover for DIN rail terminal block assemblies, closing and insulating the end of a terminal strip. At 2.2 ...

The Weidmuller 1527540000 ZQV 2.5N/2 is a 2-pole cross-connector (jumper) for 2.5mm2 terminal blocks, grey colour. It links adjacent terminal block...

The Phoenix Contact UT 16 BU is a feed-through terminal block rated at 1000 V nominal voltage and 76 A nominal current, accepting conductors from 1...

The WAGO 2002-403 is a 3-way insulated push-in type jumper bar in the TOPJOB S family, rated at 800 V (III/3) and 25 A. It commons adjacent rail-mo...

The Weidmuller A2C 10 is a WDU feed-through terminal block, 2mm2, 1000V, 57A, Blue. For general conductor feed-through in control panels. DIN rail ...

The PTI 2,5-L/TG is a Phoenix Contact installation level terminal block with tool-free push-in connection on two levels, rated 24 A / 400 V. Its 3-...

The ZB 5,LGS:FORTL.ZAHLEN 61-70 is a Phoenix Contact Zack marker strip pre-printed horizontally with consecutive numbers 61 to 70. This 10-section ...

The WAGO 2216-7792 is an end and intermediate plate, 1 mm thick, in orange, designed to terminate or divide groups of TOPJOB S rail-mount terminal ...

The Phoenix Contact FBS 4-6 is a 4-position plug-in bridge with a 6.2 mm pitch, designed for bridging terminal blocks in the CLIPLINE complete syst...