DIN Rail Terminal Blocks

The Weidmuller 1609920000 is a marker / label for industrial wiring. WS 12/6.5 MC NE WS Terminal Marker, 12x6.5mm, White - set of 45.Technical spec...

The Weidmuller 1609801044 is a marker / label for industrial wiring. DEK 5/5 MC NE WS Terminal Marker, 5x5mm, White - set of 100.Technical specific...

The Phoenix Contact UKK 3 is a double-level terminal block that routes two independent circuits within a compact 5.2 mm wide body. Rated at 500 V a...

The Weidmuller 1640740000 is a marker / label for industrial wiring. WS 8/5 MC NE WS Terminal Marker 8x5mm, White - set of 72.Technical specificati...

The ZB 5 :UNBEDRUCKT is a white (RAL 9010) Zack marker strip from Phoenix Contact for labeling modular terminal blocks and electronics modules with...

The Weidmuller 1609860000 is a marker / label for industrial wiring. WS 12/5 MC NE WS Terminal Marker, 12x5mm, White - set of 72.Technical specific...

The Phoenix Contact EB 4- 8 is a 4-position insertion bridge designed to electrically interconnect adjacent screw-mounted terminal blocks at an 8 m...

The Phoenix Contact EBS 10-8 is a 10-position insertion bridge for electrically paralleling adjacent terminal blocks at an 8 mm pitch. Constructed ...

The WAGO 2004-407 is a 7-way insulated push-in type jumper bar from the TOPJOB S series (Product Group 22), designed to common up to seven adjacent...

The Phoenix Contact US-WMTB (44X15) is a white (RAL 9010) PVC cable marker card for identifying cables with an external diameter greater than 13 mm...

The WAGO 282-868 is a 3-conductor ground terminal block from the 282 Series, rated per IEC/EN 60947-7-2, designed to terminate protective earth con...

The Phoenix Contact ST 2,5-TWIN is a three-conductor spring-cage feed-through terminal block rated at 800 V nominal voltage and 24 A nominal curren...

The Phoenix Contact US-EML (15X6) is an adhesive device marker supplied in pre-punched sheets of 132 white (RAL 9010) polyester labels, each 15 mm ...

The WAGO 2016-7607 is a 2-conductor ground terminal block from the TOPJOB S 2016 Series, designed for DIN-35 rail mounting (35 x 15 and 35 x 7.5). ...

The Weidmuller 1988160000 is a terminal block for industrial wiring. AAP11 1.5 LI RD Modular Distribution Terminals, PUSH IN, 1.5mm² 500V 17.5A, Da...

The Phoenix Contact FBS 4-8 is a 4-position plug-in bridge designed for use in the CLIPLINE complete terminal block system. With an 8.2 mm pitch an...

The Weidmuller 1527880000 ZQV 2.5N/10 BL is a 10-pole cross-connector (jumper) for 2.5mm2 terminal blocks, blue (neutral) colour. It links adjacent...

The Weidmuller 2007100000 is a marker / label for industrial wiring. DEK 5/3.5mm WS Terminal Marker 5x3.5mm, White - set of 1000.Technical specific...

The Weidmuller AEP 2C 2.5 (order no. 1514400000) is an A-series end plate for Weidmuller A-series 2.5 mm² feed-through terminal blocks. Fitted to t...

The WAGO 281-101 is a 2-conductor through terminal block from the 281 Series, designed for simple and secure electrical connections in industrial a...

The UCT-WMCO 4,1 (12X4) is a clip-on wire marking sheet from Phoenix Contact's UniCard labeling range, designed for subsequent conductor identifica...

The WAGO 2002-406/000-005 is a 6-way insulated push-in type jumper bar for the 2002 series, designed to connect six adjacent rail-mount terminal bl...

The Weidmuller A2T 2.5 (order no. 1547610000) is an A-series double-tier feed-through terminal block with PUSH IN connection, in dark beige. The tw...

The Weidmuller WDU 35N is a WDU feed-through terminal block, 35mm2, 500V, 125A, Beige. For general conductor feed-through in control panels. DIN ra...