DIN Rail Terminal Blocks

The SB 2-RTK/S is a 2-position copper bridge bar from Phoenix Contact, designed to electrically connect adjacent RTK-series terminal block position...

The UC-TMF 10 is a white (RAL 9010) terminal block marker sheet from Phoenix Contact for flat marker groove terminals with a 10.2 mm pitch. Labels ...

The Phoenix Contact ATS-RTK-BEN is a PVC partition plate that provides electrical isolation between adjacent terminal blocks in control panels and ...

The Weidmuller 0523060011 is a marker / label for industrial wiring. DEK 5 FWZ 11-20 Dekafix, Terminal Marker, 5x5mm, White - set of 50.Technical s...

The Phoenix Contact URTK/S-BEN 10 is a test disconnect terminal block rated at 500 V / 57 A nominal, designed for current transformer secondary cir...

The UCT-WMCO 6,8 (23X8) is a clip-on conductor marker from Phoenix Contact for subsequent labeling of cables with an external diameter of 6.1 mm to...

The Weidmuller 1609920000 is a marker / label for industrial wiring. WS 12/6.5 MC NE WS Terminal Marker, 12x6.5mm, White - set of 45.Technical spec...

The Weidmuller 1609801044 is a marker / label for industrial wiring. DEK 5/5 MC NE WS Terminal Marker, 5x5mm, White - set of 100.Technical specific...

The Phoenix Contact UKK 3 is a double-level terminal block that routes two independent circuits within a compact 5.2 mm wide body. Rated at 500 V a...

The Weidmuller 1640740000 is a marker / label for industrial wiring. WS 8/5 MC NE WS Terminal Marker 8x5mm, White - set of 72.Technical specificati...

The Weidmuller 1609860000 is a marker / label for industrial wiring. WS 12/5 MC NE WS Terminal Marker, 12x5mm, White - set of 72.Technical specific...

The Phoenix Contact EB 4- 8 is a 4-position insertion bridge designed to electrically interconnect adjacent screw-mounted terminal blocks at an 8 m...

The Phoenix Contact EBS 10-8 is a 10-position insertion bridge for electrically paralleling adjacent terminal blocks at an 8 mm pitch. Constructed ...

The WAGO 2004-407 is a 7-way insulated push-in type jumper bar from the TOPJOB S series (Product Group 22), designed to common up to seven adjacent...

The Phoenix Contact US-WMTB (44X15) is a white (RAL 9010) PVC cable marker card for identifying cables with an external diameter greater than 13 mm...

The WAGO 282-868 is a 3-conductor ground terminal block from the 282 Series, rated per IEC/EN 60947-7-2, designed to terminate protective earth con...

The Phoenix Contact ST 2,5-TWIN is a three-conductor spring-cage feed-through terminal block rated at 800 V nominal voltage and 24 A nominal curren...

The Phoenix Contact US-EML (15X6) is an adhesive device marker supplied in pre-punched sheets of 132 white (RAL 9010) polyester labels, each 15 mm ...

The WAGO 2016-7607 is a 2-conductor ground terminal block from the TOPJOB S 2016 Series, designed for DIN-35 rail mounting (35 x 15 and 35 x 7.5). ...

The Weidmuller 1988160000 is a terminal block for industrial wiring. AAP11 1.5 LI RD Modular Distribution Terminals, PUSH IN, 1.5mm² 500V 17.5A, Da...

The Weidmuller 2007100000 is a marker / label for industrial wiring. DEK 5/3.5mm WS Terminal Marker 5x3.5mm, White - set of 1000.Technical specific...

The Weidmuller AEP 2C 2.5 (order no. 1514400000) is an A-series end plate for Weidmuller A-series 2.5 mm² feed-through terminal blocks. Fitted to t...

The WAGO 281-101 is a 2-conductor through terminal block from the 281 Series, designed for simple and secure electrical connections in industrial a...

The UCT-WMCO 4,1 (12X4) is a clip-on wire marking sheet from Phoenix Contact's UniCard labeling range, designed for subsequent conductor identifica...