Contactors

The Schneider Electric A9C20731 is an Acti 9 iCT single-pole contactor rated at 25 A (AC-7A) with a 230-240 V AC 50 Hz coil for remote switching of...

The Schneider Electric LA4DT0U is an electronic timer module from the TeSys range, designed for use with TeSys D and TeSys F series contactors. It ...

The Circutor CMC 12 B (code R281A6) is a capacitor-switching contactor from the CMC-B series, designed to switch single-step and multi-step capacit...

The ABB BEA38-4 (article 1SBN082306T2000) is an insulated connecting link that bridges ABB contactors in the AF26-AF38, AFC26-AFC38, and AFS26-AFS3...

The Schneider Electric CR1F265M7 is a 3-pole magnetic latching contactor from the TeSys F range, rated 265 A (AC-3) at up to 440 V AC. Its 220-230 ...

The ABB VM4 (article 1SBN030105T1000) is a mechanical interlock unit that fits between two contactors to enforce mutual exclusion - when one contac...

The Schneider Electric LA4DFB is a TeSys D interface amplifier module with relay output, enabling DC logic systems to control AC-coil TeSys D conta...

The Schneider Electric VZ17 is a shaft extension accessory for the TeSys VARIO range, designed to extend the operating handle of V02 to V2 series d...

The Schneider Electric VZ16 is an additional earthing contact block from the TeSys Vario range, designed for use with V5 and V6 disconnectors. It p...

The Schneider Electric VCCD2 is a TeSys Vario emergency stop switch disconnector rated at 40 A, designed for door-mounting handle with DIN rail or ...

The Schneider Electric VBF01 is a TeSys Vario switch disconnector rated at 20 A, designed for door mounting in industrial control panels. It provid...

The Schneider Electric V1 is a TeSys VARIO 3-pole switch disconnector body with a 32 A conventional free air thermal current and rated operational ...

The Schneider Electric LUCD32BL is an advanced control unit for the TeSys Ultra range, designed for motor management and protection applications. I...

The Schneider Electric LUA1C11 is a signalling auxiliary contact for the TeSys Ultra (LUA1) range, providing 1 NO + 1 NC contact composition. It si...

The Schneider Electric LRD365L is a TeSys Deca thermal differential overload relay for motor protection. It covers an adjustable range of 48 to 65 ...

The Schneider Electric GV2G05 is a 3-pole terminal block from the Linergy FT series, designed as a connection accessory for TeSys GV2, TeSys D, TeS...

The Schneider Electric CAD32F7 is a TeSys D auxiliary contactor (control relay) with a 3 NO + 2 NC contact arrangement, designed for control circui...

The Schneider Electric CAD32B7 is a TeSys D auxiliary contactor (control relay) from the TeSys CAD range, designed for use in control circuits up t...

The Siemens 3RV2901-2E is a transverse auxiliary switch from the SIRIUS range, designed to plug directly onto Siemens 3RV2 circuit breakers in size...

The Siemens 3RV2901-1F is a SIRIUS transverse auxiliary switch with 2 instantaneous normally open (NO) contacts and screw terminals. It attaches vi...

The ABB OFAF000H40 (article 1SCA022627R1120) is an HRC fuse link in NH000 size, designed to protect electrical circuits against overloads and short...

The Schneider Electric LA9ZX01485 is a 4-pole IEC standard busbar holder from the TeSys Linergy BZ range, designed to support copper busbars with c...

The Schneider Electric LA9ZX01131 is a rear end cover accessory for TeSys LA9Z busbar supports, supplied as a set of 10 pieces. Designed for 4-pole...

The Schneider Electric LA9ZA32624 is a 3-pole busbar mounting plate (adaptor) from the Linergy BZ range, designed to connect 63 A busbars to TeSys ...