Automation Control Components

The Siemens 3RH2921-2DA20 is a SIRIUS laterally mountable auxiliary switch with 2 instantaneous normally open (NO) contacts. It snaps onto the left...

The Siemens 3RH2921-2DA11 is a SIRIUS laterally mountable auxiliary switch with 1 NO + 1 NC contacts, designed for snap-on fitting to the left or r...

The Siemens 3RH2921-2DA02 is a SIRIUS lateral auxiliary switch with 2 NC instantaneous contacts, designed to snap-on beside 3RT2 contactors and 3RH...

The Phoenix Contact SKS 20 is a shield connection terminal block designed to apply cable shields directly to busbars. It uses spring-cage connectio...

The Siemens 3RH2921-1DA20 is a SIRIUS lateral auxiliary switch providing 2 instantaneous normally open contacts for use with 3RT2 contactors and 3R...

The Siemens 3RH2921-1DA02 is a SIRIUS lateral auxiliary switch with 2 instantaneous normally closed (NC) contacts, designed to mount on either side...

The Phoenix Contact SKS 8 is a shield connection terminal block designed to apply cable shields to busbars in control panel and industrial wiring i...

The Siemens 3RH2911-2FA40 is a SIRIUS front-mount auxiliary switch with 4 normally open (NO) instantaneous contacts, designed to snap onto the fron...

The Siemens 3RH2911-2FA04 is a SIRIUS front-mounted auxiliary switch featuring 4 NC instantaneous contacts with spring-loaded terminals. It snaps d...

The Siemens 3RH2911-1FA04 is a SIRIUS series auxiliary switch designed to snap onto the front of 3RT2.1 contactors and 3RH2 contactor relays. It pr...

The Siemens 3RH2911-1DA11 is a SIRIUS lateral auxiliary switch with 1 NO and 1 NC instantaneous contact, designed for snap-on mounting onto 3RT2.1 ...

The Siemens 3RH1921-2CA10 is a SIRIUS front-mounted auxiliary switch with 1 normally open (NO) instantaneous contact and spring-type terminals, des...

The Siemens 3RH1921-2CA01 is a SIRIUS front-side auxiliary switch with 1 NC instantaneous contact and spring-loaded terminals, designed for snap-on...

The Phoenix Contact D-PTTBS 1,5/S is a gray end cover for terminating DIN rail-mounted terminal block assemblies. At 2.2 mm wide, 78.6 mm tall, and...

The Phoenix Contact FBS 4-3,5 is a 4-position plug-in bridge designed to parallel adjacent terminal blocks within the CLIPLINE complete system. Ope...

The Phoenix Contact EBS 2- 8 is a 2-position insertion bridge with an 8 mm pitch, used to electrically parallel adjacent terminal blocks in DIN rai...

The Phoenix Contact EBS 3-8 is a 3-position insertion bridge designed to electrically connect adjacent terminal blocks at an 8 mm pitch. Built with...

The Phoenix Contact EBS 10-8 is a 10-position insertion bridge for electrically paralleling adjacent terminal blocks at an 8 mm pitch. Constructed ...

The Phoenix Contact ATP-UT-TWIN is a partition plate designed for use with twin-entry terminal blocks, providing physical separation and insulation...

The Phoenix Contact UT 6 BU is a 1000 V, 41 A blue feed-through terminal block using M4 screw connection for conductors from 0.2 mm² to 10 mm², wit...

The Phoenix Contact ST 16 BU is a feed-through terminal block rated at 1000 V nominal voltage and 76 A nominal current. Its spring-cage connection ...

The Phoenix Contact ST 16 (catalog number 3036149) is a feed-through terminal block rated for 1000 V nominal voltage and 76 A nominal current, desi...

The Phoenix Contact FBS 6-8 is a 6-position plug-in bridge for the CLIPLINE complete terminal block system, designed to bridge multiple terminal bl...

The FBS 50-6 is a 50-position plug-in bridge from Phoenix Contact, designed to link up to 50 terminal blocks simultaneously in a single insertion s...