Automation Control Components

The Siemens 3RT2025-1AP00 is a 3-pole SIRIUS power contactor from the 3RT2 series, rated 17 A and 7.5 kW at 400 V in AC-3/AC-3e duty. It is equippe...

The Siemens 3RT2023-1AP00 is a SIRIUS power contactor, 3-pole, rated 9 A at AC-3e/AC-3 and 4 kW at 400 V. The control coil operates at 230 V AC, 50...

The Siemens 3RH2921-2DA20 is a SIRIUS laterally mountable auxiliary switch with 2 instantaneous normally open (NO) contacts. It snaps onto the left...

The Siemens 3RH2921-1DA20 is a SIRIUS lateral auxiliary switch providing 2 instantaneous normally open contacts for use with 3RT2 contactors and 3R...

The Siemens 3RH1921-1CA01 is a front-side auxiliary switch from the SIRIUS range, featuring 1 instantaneous NC contact with screw terminals. It sna...

The Phoenix Contact FBS 4-3,5 is a 4-position plug-in bridge designed to parallel adjacent terminal blocks within the CLIPLINE complete system. Ope...

The Phoenix Contact EBS 10-8 is a 10-position insertion bridge for electrically paralleling adjacent terminal blocks at an 8 mm pitch. Constructed ...

The Phoenix Contact ATP-UT-TWIN is a partition plate designed for use with twin-entry terminal blocks, providing physical separation and insulation...

The Phoenix Contact UT 6 BU is a 1000 V, 41 A blue feed-through terminal block using M4 screw connection for conductors from 0.2 mm² to 10 mm², wit...

The Phoenix Contact D-ST 2,5-3L is an end cover designed to close and insulate the open ends of D-ST series terminal block assemblies on DIN rails....

The Phoenix Contact FBS 6-8 is a 6-position plug-in bridge for the CLIPLINE complete terminal block system, designed to bridge multiple terminal bl...

The Phoenix Contact ST 4-PE is a spring-cage protective conductor terminal block for reliable PE terminations in industrial switchgear and control ...

The Phoenix Contact D-ST 2,5-QUATTRO is a gray (RAL 7042) end cover designed to close and protect the end of terminal block assemblies on DIN rails...

The Phoenix Contact D-STTB 4 is an end cover designed to terminate and protect DIN rail-mounted terminal block assemblies. Made from gray PA (polya...

The Phoenix Contact FBS 3-8 is a 3-position plug-in bridge designed to parallel adjacent terminal blocks in the CLIPLINE complete system, bridging ...

The FBS 3-6 is a Phoenix Contact plug-in bridge for use in the CLIPLINE complete modular terminal block system. This 3-position bridge features a 6...

The Phoenix Contact FBS 5-10 is a 5-position plug-in bridge for paralleling modular terminal blocks at a 10.2 mm pitch. With a maximum load current...

The Phoenix Contact FBST 500-PLC RD is a continuous plug-in bridge rated for a maximum load current of 32 A, designed to parallel multiple terminal...

The Phoenix Contact UNO-PS/1AC/24DC/30W is a primary-switched DIN rail power supply from the UNO POWER family, delivering 24V DC at 1.25A (30W) fro...

The UCT-TM 10 is an unmarked terminal block marker from Phoenix Contact, supplied in white (RAL 9010) card sheets for terminals with tall marker gr...

The Phoenix Contact STP 5-2 is a plug-in marker carrier that snaps into STTB 2,5, STTB 4, PTTB 2,5, and PTTB 4 double-level spring-cage terminal bl...

The Phoenix Contact KSS 8 is a plug-in short-circuit connector designed to electrically bridge two adjacent terminal blocks on an 8 mm pitch. Built...

The ABB B7-30-10-80 (article GJL1311001R8100) is a compact 3-pole mini contactor with one auxiliary contact and screw terminals. Rated for a 220-24...

ABB 1803-94-507 (article 2CKA001753A0096) is a single-gang UAE/IAE (ISDN) data, telecommunication, and antenna outlet cover in white, belonging to ...