Automation Control Components

The Siemens 3RH1921-1CA10 is a SIRIUS front-side auxiliary switch with 1 NO instantaneous contact and screw terminals, designed to snap onto the fr...

The Phoenix Contact D-PTI/3B is an end cover that closes and protects the end of terminal block rows, providing a neat finish to DIN rail assemblie...

The Phoenix Contact FBS 3-3,5 is a 3-position plug-in bridge for use with the CLIPLINE complete terminal block system, enabling multiple terminal b...

The Phoenix Contact D-PT 10 is a gray end cover designed to close off and protect the ends of terminal block assemblies mounted on DIN rails. At ju...

The Phoenix Contact UT 2,5 RD (catalog number 3045062) is a feed-through terminal block rated at 1000 V and 24 A with M3 screw connection. Acceptin...

The Phoenix Contact UT 35-PE is a protective conductor terminal block for DIN rail mounting, accepting conductors from 1.5 mm² to 35 mm² via M6 scr...

The Phoenix Contact ST 4-MT is a knife-disconnect terminal block rated at 400 V nominal voltage and 20 A nominal current, using spring-cage connect...

The Phoenix Contact FBS 10-5 BU is a 10-position plug-in bridge designed for the CLIPLINE complete system, enabling simultaneous bridging of up to ...

The Phoenix Contact ST 16-PE is a spring-cage protective conductor terminal block with a nominal cross section of 16 mm², engineered for fast, reli...

The Phoenix Contact ST 4 is a 1-level feed-through terminal block rated at 800 V nominal voltage and 32 A nominal current. Its spring-cage connecti...

The ATP-STTB 4 from Phoenix Contact is a partition plate designed to electrically isolate and separate adjacent terminal blocks within DIN rail ass...

The Phoenix Contact D-STTB 2,5 (catalog number 3030459) is a gray end cover designed to terminate and protect DIN rail-mounted terminal block assem...

The Phoenix Contact FBS 5-6 is a 5-position plug-in bridge for paralleling adjacent modular terminal blocks in a single snap-in operation. With a 6...

The Phoenix Contact FBS 2-8 (catalog number 3030284) is a plug-in bridge designed to electrically connect and parallel adjacent terminal blocks in ...

The Phoenix Contact FBS 4-6 is a 4-position plug-in bridge with a 6.2 mm pitch, designed for bridging terminal blocks in the CLIPLINE complete syst...

The Phoenix Contact SK 35 is a steel shield connection terminal block that attaches cable shields onto neutral busbars with a contact resistance be...

The Phoenix Contact SK 20 is a shield connection clamp for grounding cable shields directly on busbars, with a contact resistance of less than 1 mΩ...

The Phoenix Contact FBS 2-12 is a 2-position plug-in bridge for use with the CLIPLINE complete terminal block system, bridging adjacent blocks via ...

The Phoenix Contact UK 5-HESILED 24 (catalog number 3004126) is a single-position fuse modular terminal block rated at 6.3 A and 24 V, accepting G-...

The FBST 500-PLC BU is a continuous plug-in bridge from Phoenix Contact designed to electrically parallel adjacent PLC-compatible terminal blocks i...

The Phoenix Contact SZS 0,4X2,0 is a precision micro screwdriver with a bladed tip measuring 0.4 mm thick by 2.0 mm wide and a 60 mm blade length, ...

The Phoenix Contact FBS 6-6 is a 6-position plug-in bridge designed for rapid potential connection across multiple terminal blocks in the CLIPLINE ...

The ABB VB6A-30-10-01 (article GJL1211911R0101) is a compact mini reversing contactor built for three-phase motor control in space-constrained inst...

The ABB 2513-94-507 (article 2CKA001725A1481) is a 3-gang cover frame in alpine white from the ABB Basic55 series. It provides a neat finished surr...