Automation Control Components

The Telemecanique XCKN2149G11 is an XCKN series thermoplastic limit switch with a plastic roller lever actuator, Pg11 cable entry, 1NC+1NO snap-act...

The Telemecanique XCKN2106G11 is an XCKN series thermoplastic limit switch with a cat's whisker actuator and Pg11 cable entry. The cat's whisker sp...

The Socomec 26943021 is a 3-pole terminal shroud that protects against direct contact with terminals or connection parts on switch-disconnectors fi...

The Socomec 26003064 is a 3-pole AC load break switch from the SIRCO range, designed for manual or remote operation in 415 VAC and 500 VDC low volt...

The Socomec 22995012 is a direct rotary handle accessory for the SIRCO M range of switch-disconnectors, enabling direct on-body manual operation of...

The Weidmuller A2C is a WDU feed-through terminal block, 2mm2, 800V, 24A, Beige. For general conductor feed-through in control panels. DIN rail mo...

The Weidmuller WAP WDK2,5 is a WDK two-level feed-through terminal, 2.5mm2. Double-deck design provides two connection levels in a single rail posi...

The Weidmuller WDU 10 is a WDU feed-through terminal block, 10mm2, 1000V, 57A, Beige. For general conductor feed-through in control panels. DIN rai...

The Weidmuller WDU 4 is a WDU feed-through terminal block, 4mm2, 800V, 32A, Blue. For general conductor feed-through in control panels. DIN rail mo...

The Weidmuller WDU 2,5 is a WDU feed-through terminal block, 2.5mm2, 800V, 24A, Blue. For general conductor feed-through in control panels. DIN rai...

The Weidmuller WPE 10 is a WPE protective earth terminal block, 10mm2, yellow-green. For PE conductor distribution in control panels. DIN rail moun...

The Weidmuller WPE 4 is a WPE protective earth terminal block, 4mm2, yellow-green. For PE conductor distribution in control panels. DIN rail mounti...

The Hager ESC440 is a 4-pole installation contactor rated at 40 A with a 230 V AC control coil. It carries four normally open (NO) contacts and a r...

The Siemens 3RV2901-1F is a SIRIUS transverse auxiliary switch with 2 instantaneous normally open (NO) contacts and screw terminals. It attaches vi...

The Siemens 3RV2011-0KA10 is a SIRIUS 3RV2 size S00 circuit breaker for 3-pole motor protection. It provides CLASS 10 thermal overload protection w...

The Siemens 3RV2011-0JA10 is a 3-pole, size S00 SIRIUS motor protection circuit breaker with an adjustable thermal overload release of 0.7...1 A an...

The Siemens 3RT2046-1AP00 is a SIRIUS 3RT2 three-pole power contactor rated at 95 A and 45 kW at 400 V for AC-3e/AC-3 motor switching duty. Its 230...

The 3RT2037-1AP00 is a Siemens SIRIUS 3RT2 series power contactor rated for AC-3/AC-3e operation at 65 A and 30 kW at 400 V. This 3-pole, size S2 d...

The Siemens 3RT2017-1AP02 is a SIRIUS 3RT2 power contactor rated at 12 A and 5.5 kW at 400 V in AC-3/AC-3e duty, for switching three-phase AC loads...

The Siemens 3RT2017-1AP01 (MLFB: 3RT2017-1AP01) is a SIRIUS 3RT2 series 3-pole power contactor rated at 12 A / 5.5 kW at 400 V under AC-3/AC-3e dut...

The Phoenix Contact D-PTIO 1,5/S/3 is a gray PA end cover that closes the open terminal side of compatible terminal block assemblies. Measuring 2.2...

The Siemens 3RH2911-2HA22 is a SIRIUS front-mounted auxiliary switch with 2 NO + 2 NC instantaneous contacts, designed to snap onto the front of 3R...

The Phoenix Contact D-PT 16 N is a gray end cover designed to close off the open terminal side of PT series terminal blocks. Measuring 2.2 mm wide,...

The Phoenix Contact D-PT 2,5-PE/3L is an end cover designed to provide a clean, insulated closure at the end of PT 2.5 terminal block assemblies. C...