Automation Control Components

The Siemens 3RV2011-1GA10 is a SIRIUS 3RV2 series motor protection circuit breaker, size S00, with a 3-pole configuration and an adjustable overloa...

The Siemens 3RT2018-1BB41 is a 3-pole SIRIUS power contactor rated at 16 A / 7.5 kW at 400 V (AC-3/AC-3e), controlled by a 24 V DC coil with one bu...

The Siemens 3RH2911-1HA22 is a SIRIUS front-mounted auxiliary switch with 2 NO + 2 NC instantaneous contacts, designed to snap onto the front of 3R...

The Phoenix Contact FBS 2-3,5 is a plug-in bridge designed for use with CLIPLINE complete modular terminal blocks, bridging two positions at a 3.5 ...

The Phoenix Contact SK 8 is a shield connection clamp for terminating cable shields on neutral busbars, achieving a contact resistance below 1 mΩ. ...

The Phoenix Contact ATP-ST 6 is a partition plate designed to provide physical separation and electrical isolation between adjacent terminal blocks...

The FBS 50-3,5 BU is a 50-position plug-in bridge from Phoenix Contact, designed to parallel up to 50 terminal blocks in a single step using both b...

The Phoenix Contact FBS 50-3,5 is a 50-position plug-in bridge for the CLIPLINE complete terminal block system. With a 3.5 mm pitch and a maximum l...

The Schneider Electric RXZE2M114 is a plugin relay socket from the Harmony Electromechanical Relays range, designed to accept RXM and REXL plug-in ...

The Schneider Electric LADN11 is a TeSys D auxiliary contact block featuring a 1 NO + 1 NC contact arrangement with screw terminal connections. Des...

The Schneider Electric LP2K0610BD is a TeSys K reversing contactor with 3-pole (3NO) configuration, designed for motor control applications in AC-3...

The Schneider Electric LV429338T is an extended rotary handle accessory for the ComPacT NSX100, NSX160, and NSX250 moulded-case circuit breaker ran...

The A9XPT920 is a set of 20 contact insulators for Acti 9 Linergy FH comb busbars, supplied as an insulation accessory within the Schneider Electri...

The A9XPH112 is a 1-phase horizontal comb busbar accessory from the Schneider Electric Acti 9 range, featuring an easy-cutting design for simplifie...

The Schneider Electric A9C22715 is an Acti 9 iCT contactor for switching and controlling loads in modular distribution boards within the Acti 9 DIN...

The Schneider Electric Acti9 iPC (A9A15310) is a modular DIN rail socket outlet from the Acti 9 range, providing a Schuko-type 16 A mains supply po...

The Schneider Electric ATV320U55N4C is a compact wall-mounted variable frequency drive from the Altivar Machine ATV320 series, rated at 5.5 kW for ...

The Schneider Electric ATV320U30N4C is a 3 kW compact wall-mount variable frequency drive from the Altivar Machine ATV320 series, designed for thre...

The ATV320U07N4C is a Schneider Electric Altivar Machine ATV320 compact variable frequency drive for 0.75 kW three-phase motors on 380...500 V supp...

The ABB CP1-11G-10 (article 1SFA619100R1112) is a momentary flush pushbutton from ABB's compact range, offered with green illumination and a black ...

The Schneider Electric XB5AS8442 is a red Ø40mm emergency stop push-button from the Harmony XB5 range, designed for 22mm panel cutout mounting. It ...

The M22-LED-W is an Eaton Moeller series LED element for front mounting in 22 mm operator interface assemblies, operating on 12-30 V AC/DC with whi...

The ABB CP1-10G-10 (article 1SFA619100R1012) is a momentary flush pushbutton from ABB's compact range, featuring a green, non-illuminated actuator ...

The Schneider Electric XB4BS84441 is a red Ø40mm emergency stop push-button from the Harmony XB4 range, designed for 22mm panel mounting in industr...