Automation Control Components

The Siemens 3RT2018-1BB41 is a 3-pole SIRIUS power contactor rated at 16 A / 7.5 kW at 400 V (AC-3/AC-3e), controlled by a 24 V DC coil with one bu...

The Siemens 3RH2911-1HA22 is a SIRIUS front-mounted auxiliary switch with 2 NO + 2 NC instantaneous contacts, designed to snap onto the front of 3R...

The FBS 2-5 is a 2-position plug-in bridge from Phoenix Contact, designed to electrically connect adjacent terminal blocks in the CLIPLINE complete...

The Phoenix Contact AB/SS-M is a support bracket designed to secure 3 x 10 mm busbars in panel assemblies, providing direct contact to the mounting...

The ABB AF16-30-10-13 (article 1SBL177001R1310) is a 3-pole contactor rated at 690 V IEC and 600 V UL, built to control motors up to 7.5 kW at 400 ...

The Schneider Electric VCF2 is a 3-pole TeSys Vario emergency stop switch disconnector rated 40 A, designed for door mounting on industrial control...

The Schneider Electric LADN31 is a front-mounting auxiliary contact block for the TeSys D and TeSys Deca contactor series, offering a 3 NO + 1 NC i...

The Schneider Electric LADN11 is a TeSys D auxiliary contact block featuring a 1 NO + 1 NC contact arrangement with screw terminal connections. Des...

The Schneider Electric LP2K0610BD is a TeSys K reversing contactor with 3-pole (3NO) configuration, designed for motor control applications in AC-3...

The Schneider Electric ATV320U15N4C is a variable frequency drive (VFD) from the Altivar Machine ATV320 series, designed for complex machine applic...

The GV2AF01 is a 3-pole combination block from Schneider Electric, designed to directly connect TeSys GV2 motor circuit breakers to LC1K and LP1K c...

The Schneider Electric LC1DT40P7 is a TeSys D 4-pole (4 NO) AC contactor rated at 40 A (AC-1) for resistive loads up to 440 V, with a 230 V AC 50/6...

The Schneider Electric LC1D95P7 is a 3-pole TeSys D contactor rated 95 A at up to 440 V in AC-3 duty, with a 230 V AC 50/60 Hz control coil. It sup...

The Schneider Electric LC1D18BD is a 3-pole TeSys D DC-coil contactor rated at 18 A AC-3 at up to 440 V AC, controlled by a 24 V DC coil. Designed ...

The Telemecanique XCKN2121G11 is a compact limit switch from the XC Standard series, providing position detection and end-of-travel control via a s...

The Eaton M22-DL-G (catalog 216927) is a flush-mounted momentary illuminated pushbutton actuator from the RMQ-Titan M22 series, featuring a green l...

The Schneider Electric XB4BVB4 is a complete red pilot light from the Harmony XB4 range, featuring a 22.5 mm mounting diameter, flat smooth lens, a...

The Siemens 6EP1437-2BA20 is a SITOP PSU300S stabilized DIN-rail power supply with 3-phase 400-500 V AC wide-range input and regulated 24 V DC / 40...

The Eaton M22-B is a round blanking plug for the Moeller M22 series, designed to close off spare 22 mm mounting locations in control panels and enc...

The Socomec 93544006 ATyS g M is a 4-pole automatic transfer switch (ATS) rated 63 A at 230/400 V AC, for automatic changeover between a mains supp...

The Weidmuller WDU 2,5 is a WDU feed-through terminal block, 2.5mm2, 800V, 24A, Blue. For general conductor feed-through in control panels. DIN rai...

The Siemens 3RT2026-1BB40 is a 3-pole SIRIUS power contactor rated at 25 A and 11 kW at 400 V for AC-3/AC-3e duty. Operated by a 24 V DC coil, it f...

The Phoenix Contact SK 14 is a shield connection clamp designed to terminate cable shields directly onto busbars, delivering a contact resistance o...

The Phoenix Contact SK 8 is a shield connection clamp for terminating cable shields on neutral busbars, achieving a contact resistance below 1 mΩ. ...