Automation Control Components

The Siemens 3RT2946-1CD00 is a SIRIUS surge suppressor (RC element) that damps the switching overvoltages produced by the coils of size S3 SIRIUS 3...

The Schneider GV2L22 is a TeSys Deca GV2L magnetic motor circuit breaker for short-circuit protection of motors up to 25 A. It is a 3-pole, magneti...

The Siemens SIRIUS 3RT1065-6AB36 is a 3-pole power contactor from the size S10 frame, rated 265 A / 132 kW at 400 V (AC-3) for switching three-phas...

The ORNO OR-CR-208 is an indoor microwave (radar) motion sensor with low power emission, designed for installation in luminaires. It features 360° ...

The ORNO OR-CR-241 is an ultra flat passive infrared (PIR) motion sensor for indoor ceiling surface mounting, compatible with LED and conventional ...

DIN rail twilight sensor for indoor and outdoor use. The light-sensitive probe is housed in a hermetic external enclosure connected to the DIN modu...

The ORNO OR-WE-516 is a 3-phase DIN rail energy meter that measures consumption in kWh and supports remote reading of registers via a wired RS-485 ...

The OR-WE-524 is a single-phase electronic energy meter for direct measurement of active and reactive energy in a single-phase system. It operates ...

The Schneider Electric LXD1V7 is a TeSys D replacement control coil with a 400 V AC, 50/60 Hz control circuit voltage, for TeSys D (LC1D) contactor...

The Schneider Electric LC1D65008P7 is a 4-pole contactor from the TeSys D range, suitable for switching resistive and low-inductive AC loads in ind...

The GVAPL01 is a dedicated handle mounting tool from Schneider Electric's TeSys range, designed to assist with the fitting of handles on TeSys GV-U...

The Schneider Electric XALG04 is an empty control station from the Harmony XALG range, designed for customer assembly in severe environments. It ac...

The Schneider Electric XALG01 is an empty control station from the Harmony XALG range, designed for severe-ambiance environments and supplied ready...

The Schneider Electric VW3A8306TF03 is a Modbus T tap connection accessory that splits a Modbus network line into two outputs. It features one RJ45...

The Schneider Electric ZB5AZ105 is a complete body and contact block unit from the Harmony XB5 range, combining a plastic fixing collar with an int...

The ZB5AZ103 is a Schneider Electric Harmony XB5 single contact block with mounting element (body/fixing collar), designed for 22 mm push-button co...

The Schneider Electric ZB4BD5 is a black 3-position spring-return selector switch head in the Harmony XB4 range, designed for 22 mm panel mounting ...

The Schneider Electric A9C20884 is a 4-pole normally open iCT modular contactor from the Acti 9 range, designed for switching electrical loads in r...

The Giovenzana MFI is a snap-action microswitch with a pin-plunger actuator (no lever) and 1 NC + 1 NO contacts, part of Giovenzana's MFI lift-tech...

The Siemens 6EP1323-2BA00 is a SITOP PSU100S stabilized DIN-rail power supply with 1-phase 120/230 V AC auto-range input and regulated 12 V DC / 14...

The Siemens 5SY6202-7 is a SENTRON 2-pole miniature circuit breaker rated 2 A on a C tripping characteristic. It provides combined overload and sho...

The Siemens 5SU1324-7FA06 is a SENTRON 2-pole RCBO (residual current circuit breaker with overcurrent protection) rated 6 A on a C tripping charact...

The Siemens 6EP3436-8SB00-0AY0 is a SITOP PSU8200 stabilized DIN-rail power supply with 3-phase 400-500 V AC wide-range input and regulated 24 V DC...

The Siemens 3RV2011-0CA10 is a SIRIUS 3-pole motor protection circuit breaker in size S00 frame with adjustable thermal overload set to 0.18-0.25 A...