Products

The REL-MR-120AC/21-21/MS from Phoenix Contact is a plug-in miniature single relay with 2 changeover contacts, 120 V AC coil voltage, test button, ...

The REL-MR-230AC/21-21/MS is a Phoenix Contact plug-in miniature relay with 2 changeover contacts and a 230 V AC coil, suited for panel-mount autom...

The REL-MR- 24DC/21-21AU/MS is a Phoenix Contact plug-in miniature relay with 2 changeover contacts featuring multi-layer AgNi hard gold-coated con...

The REL-MR-230AC/21-21AU/MS is a Phoenix Contact plug-in miniature single relay with multi-layer hard gold-coated 2 changeover contacts and a 230 V...

The Phoenix Contact FBS 50-3,5 is a 50-position plug-in bridge for the CLIPLINE complete terminal block system. With a 3.5 mm pitch and a maximum l...

The FBS 50-3,5 BU is a 50-position plug-in bridge from Phoenix Contact, designed to parallel up to 50 terminal blocks in a single step using both b...

The Phoenix Contact D-UK 4/10 is an end cover designed to provide a clean, protective termination for UK-series terminal block assemblies on DIN ra...

The Phoenix Contact UK 5-MTK-P/P is a knife-disconnect terminal block with test socket screws for insertion of test plugs, allowing safe circuit is...

The Phoenix Contact UK 5-HESILED 24 (catalog number 3004126) is a single-position fuse modular terminal block rated at 6.3 A and 24 V, accepting G-...

The Phoenix Contact UK 5 N is a gray feed-through terminal block rated at 800 V nominal voltage and 32 A nominal current. Accepting rigid conductor...

The Phoenix Contact UK 6 N is a feed-through terminal block rated for 800 V and 41 A, using screw connection with a 6 mm² nominal cross section for...

The Phoenix Contact FBS 2-10 is a plug-in bridge designed for use with the CLIPLINE complete system, enabling fast and reliable paralleling of term...

The Phoenix Contact FBS 5-10 is a 5-position plug-in bridge for paralleling modular terminal blocks at a 10.2 mm pitch. With a maximum load current...

The Phoenix Contact FBS 2-12 is a 2-position plug-in bridge for use with the CLIPLINE complete terminal block system, bridging adjacent blocks via ...

The FBS 2-16 is a 2-position plug-in bridge from Phoenix Contact designed to electrically connect adjacent terminal blocks in the CLIPLINE complete...

The Phoenix Contact CLIPFIX 35 (catalog number 3022218) is a quick-mounting end bracket for securing terminal block assemblies on NS 35/7.5 or NS 3...

The Phoenix Contact CLIPFIX 35-5 (3022276) is a quick-mounting end bracket for NS 35/7,5 and NS 35/15 DIN rails, holding terminal block assemblies ...

The Phoenix Contact ATP-ST 6 is a partition plate designed to provide physical separation and electrical isolation between adjacent terminal blocks...

The Phoenix Contact SK 8 is a shield connection clamp for terminating cable shields on neutral busbars, achieving a contact resistance below 1 mΩ. ...

The Phoenix Contact SK 14 is a shield connection clamp designed to terminate cable shields directly onto busbars, delivering a contact resistance o...

The Phoenix Contact SK 20 is a shield connection clamp for grounding cable shields directly on busbars, with a contact resistance of less than 1 mΩ...

The Phoenix Contact SK 5 is a shield connection clamp designed to ground cable shields directly onto neutral busbars with a contact resistance of l...

The Phoenix Contact AB/SS-M is a support bracket designed to secure 3 x 10 mm busbars in panel assemblies, providing direct contact to the mounting...

The Phoenix Contact URTK 6 is a test disconnect terminal block developed specifically for use in current transformer secondary circuits, rated at 5...