Products

The Phoenix Contact URTK/S is a test disconnect terminal block rated at 400 V and 41 A nominal current, designed for safe testing in current transf...

The SB 2-RTK/S is a 2-position copper bridge bar from Phoenix Contact, designed to electrically connect adjacent RTK-series terminal block position...

The Phoenix Contact KSS 8 is a plug-in short-circuit connector designed to electrically bridge two adjacent terminal blocks on an 8 mm pitch. Built...

The Phoenix Contact NLS-CU 3/10 SN 1000MM is a copper neutral busbar with a 3 mm x 10 mm cross-section and a length of 1000 mm, rated for a nominal...

The Phoenix Contact AKG 4 GNYE is a neutral busbar connection terminal block rated at 300 V and 41 A nominal current with a 4 mm² nominal cross sec...

The Phoenix Contact AKG 16 GNYE is a green-yellow connection terminal block for neutral busbar mounting, rated at 300 V and 76 A with a nominal cro...

The Phoenix Contact E/NS 35 N is a gray polyamide end bracket designed to secure and terminate terminal block assemblies on NS 35/7.5 and NS 35/15 ...

The Phoenix Contact STP 5-2 is a plug-in marker carrier that snaps into STTB 2,5, STTB 4, PTTB 2,5, and PTTB 4 double-level spring-cage terminal bl...

The THERMOMARK-RIBBON 110/50-TC (catalog number 0801384) is a thermal transfer ink ribbon from Phoenix Contact, designed for use with the THERMOMAR...

The UCT-WMT (15X4) is a Phoenix Contact conductor marker in white (RAL 9010) sheet format, designed for clear wire identification across a cable di...

The Phoenix Contact US-EML (15X6) is an adhesive device marker supplied in pre-punched sheets of 132 white (RAL 9010) polyester labels, each 15 mm ...

The US-EMLP-HA 24 (30X18/8) is an unmarked white (RAL 9010) PVC plastic device marker from Phoenix Contact, designed for adhesive mounting on elect...

The Phoenix Contact ZBF 5:UNBEDRUCKT is a flat Zack marker strip designed to identify modular terminal blocks and electronics modules on a 5 mm pit...

The Phoenix Contact ZBF 5,LGS:FORTL.ZAHLEN is a flat Zack marker strip for systematic labeling of modular terminal blocks and electronics modules a...

The ZBF 6:UNBEDRUCKT is a flat Zack marker strip from Phoenix Contact designed for labeling modular terminal blocks and electronics modules with a ...

The Phoenix Contact ZBF 12:UNBEDRUCKT (0809735) is a flat Zack marker strip for identifying modular terminal blocks and electronics modules at a 12...

The ZBF10:UNBEDRUCKT is a flat Zack marker strip from Phoenix Contact for marking modular terminal blocks and electronics modules. Supplied unmarke...

The Phoenix Contact X-PEN 0,35 is a refillable marker pen designed for the manual labeling of markers, producing extremely wipe-proof inscriptions ...

The Phoenix Contact KLM 3 (catalog number 0811969) is a terminal strip marker carrier with infinitely adjustable labeling area height, engineered s...

The Phoenix Contact UC-TM 10 is a sheet-format terminal block marker for 10.2 mm pitch terminal blocks, supplying 48 unmarked white (RAL 9010) labe...

The Phoenix Contact UC-TM 8 is a white (RAL 9010) terminal block marker supplied in sheets of 56 individual labels, designed for terminal blocks wi...

The Phoenix Contact UC-TM 6 is a sheet-format terminal block marker designed for high-slot terminal blocks with a 6.2 mm pitch. Each sheet carries ...

The Phoenix Contact UC-TM 5 is a white (RAL 9010) sheet-format marker for terminal blocks, latching into blocks with a 5.2 mm pitch. Each sheet car...

The UC-TMF 10 is a white (RAL 9010) terminal block marker sheet from Phoenix Contact for flat marker groove terminals with a 10.2 mm pitch. Labels ...