A9S62363 Switch disconnector, Acti9 SW, 3P, 63A, 4.2kA (IEC 60947-3)

This Acti9 SW product is a modular and reliable switch disconnector. It is a 3 poles switch disconnector with 63A rated operational current (le) at 415VAC. The rated short-time withstand current (Icw) is up to 1.26kA during 1s, conforming to IEC 60947-3 standard. The rated short-circuit making capacity (Icm) of switch disconnector is up to 4.2kA. It is intended for new or renovated installation in residential and small commercial. This switch disconnector is used for control (opening and closing of circuits under load). It has a position contact indication suitable for industrial isolation, according to IEC 60947-3 standard. It is also used for disconnection of on-load electrical circuits already protected against overload and short-circuits. This product is compatible with comb busbar and distribution block. It has an ON/OFF indication (local signalling) with toggle control. The electrical endurance goes up to 20000 cycles and mechanical endurance goes up to 50000 cycles. It has a tunnel type terminals connection at top or bottom, it allows rigid copper cables. The clamping capacity of cable connection is <=50mm². It has a tunnel type terminals connection at top or bottom, it allows flexible copper cables. The clamping capacity of cable connection is <=35mm². It has a tunnel type terminals connection at top or bottom, it allows flexible with ferrule copper cables. The clamping capacity of cable connection is <=35mm². The rated operational voltage (Ue) is up to 415VAC. The operating frequency is from 50Hz to 60Hz. The rated insulation voltage (Ui) is up to 500VAC. It has a rated impulse withstand voltage (Uimp) of 6kV, conforming to IEC 60947-3 standard. It can be mounted on a DIN rail for modular installation. The width in 9mm pitches is 6. The dimensions are (W) 54mm x (H) 81mm x (D) 73mm. The product colour is white (RAL 9003). The product weight is 230g. The pollution degree is 3. The level of tropicalisation is 2 (relative humidity 95% at 55°C). The tightening torque of connection is 3.5N.m for PZ2 screwdriver type. According to IEC 60529 standard, the degree of protection is IP20. The operating temperature is from -20°C to +50°C. The storage temperature is from -40°C to +70°C. This product is complies with IEC 60947-3 standard.